Custom Fused Silica Dome | Ultra Low Expansion Optical Dome for Airborne & Aerospace Sensors






Felix Glass brings 19+ years of optical glass manufacturing and processing experience to drawing-based dome projects. We review the substrate, curved geometry, optical requirements, coating and inspection plan before quoting prototypes or repeat production. Model FG-DOME-FS-AERO01 is a custom fused silica (SiO₂) dome. Start with your working wavelength, inner and outer radii, clear aperture and installation conditions. For aerospace projects, include the required qualification program so manufacturing feasibility and verification responsibilities can be agreed before sampling. Synthetic fused silica is a silica glass, not single-crystal sapphire. Surface durability is specified through the agreed scratch or abrasion test; no sapphire hardness claim applies to this material. Specify synthetic fused silica by an agreed material grade and supporting documentation requirement. Review spectral transmission, homogeneity, inclusions and stress birefringence as appropriate to the optical path. A purity percentage alone does not define the finished dome's imaging performance. Provide the exact operating band instead of a broad “UV–IR” label. The selected substrate, path length and coating must be reviewed together. For material comparisons, explore the optical material selection knowledge hub. Sapphire, if considered, requires a separate material and manufacturing review. Define the dome as a hollow optical shell, with inner and outer surfaces and a separately dimensioned mounting interface. Final size and optical limits require a project-specific manufacturing and inspection review. If you request λ/4 at 633 nm, for example, first state whether it is a surface-figure or transmitted-wavefront limit and define the test conditions. This is an example of specification wording, not a guaranteed capability for all domes. Our optical drawing and tolerance guide explains how to organize acceptance notes. Provide the field of view, optical layout, mounting interface and expected vibration, thermal and exposure conditions. Agree how the dome will be evaluated with the sensor. Component inspection does not replace assembled-system validation. State the local temperature at the dome, heating and cooling rates, temperature gradients, duty cycle and atmosphere. Include coating, seal and mount limits in the review. The finished assembly's service temperature must be established for that configuration. Submit the applicable specification and revision, radiation type and dose where relevant, vacuum and contamination requirements, thermal/vibration sequence and pass/fail criteria. Agree whether each test is performed by Felix Glass, an external laboratory or the customer, and what records are included in the quotation. “Space grade,” flight heritage and mission lifetime are project-specific claims requiring supporting records. Neither the material name nor a general coating description establishes those qualifications. See our optical fabrication and quality-control capabilities for the wider manufacturing process. The table below illustrates a record format only. It contains no measured results and is not a test certificate. Agree the report scope, equipment, test configuration and sample identification before placing the order. For a broader application review, compare our fused silica domes for UV, NIR and optical test systems. This page focuses on airborne sensor-cover geometry and project qualification requirements; the linked product supports broader material and fabrication enquiries. Request review against your actual operating and storage profile. A material temperature reference is not a service rating for a coated dome with its mount and seals. Identify the required standard, test severity, sample quantity and records in the RFQ. Qualification scope, responsibilities, cost and timing must be agreed separately. Include your geometry and measurement needs in the enquiry. Ask which representative sample, redacted inspection record or releasable project reference can be provided for evaluation. Confirm relevance to the proposed part before relying on it. Request separate prototype and production schedules. The quotation should state what starts the lead time and identify material procurement, drawing approval, coating and external testing dependencies. Send the drawing revision, inner and outer radii, wall thickness, optical zone, working band, coating specification, environment, quantity and required acceptance records. Use the custom optics RFQ preparation checklist to organize the enquiry. For STEP, STP or DXF files, use a ZIP attachment with a PDF drawing. The current enquiry form accepts ZIP and PDF attachments up to 20 MB. Submit Drawing & Request a Quotation Email: james@felixglass.comCustom Fused Silica Domes for Airborne Sensors & Optical Test Systems
Material Selection Starts with the Optical Requirement
Geometry and Quotation Reference
Item
Reference or option
Order-specific acceptance requirements
Material
Synthetic fused silica, SiO₂
Agreed grade, supplier documentation and lot traceability.
Diameter
Diameter per submitted drawing
Blank availability and manufacturing feasibility confirmed for the submitted geometry.
Wall thickness
Wall thickness per submitted drawing
Nominal thickness, measurement positions and permitted thickness variation.
Profile
Hemispherical, partial-spherical or custom profile
Inner/outer radii, height, concentricity, datum, clear aperture and edge/flange drawing.
Surface quality
60/40, 40/20 or 20/10 may be requested for review
Named scratch-dig standard and revision, inspection zones, lighting and acceptance method.
Surface figure
Curved-surface requirement per drawing
Inner or outer surface, departure from nominal sphere, aperture, wavelength, PV/RMS and test configuration.
Transmitted wavefront
Separate from surface figure
Optical path, field angles, wavelength, aperture, mounting state, permitted removals and PV/RMS limit.
Coating
Uncoated or wavelength-specific AR, subject to review
Coated faces, spectral band, incidence angles, polarization, transmission/reflection targets and durability tests.
Environment
Defined by the application
Operating/storage temperatures, dwell times, ramp rates, cycles, mounting, atmosphere and post-test acceptance.
Quantity and lead time
Prototype and production quotations separately
Requested quantity, material availability, approved drawing and test scope. A single-piece request needs separate confirmation.
Separate Manufacturing from Mission Qualification
Airborne Sensor Covers
Ground Optical and Thermal Test Systems
Space and Other Qualification-Sensitive Projects
Agree the Manufacturing and Inspection Plan
Inspection Record Format Example
Record section
Information to include
Identification
Part and drawing revision, material lot, piece/sample ID, report number and date.
Dimensions
Specified limits, datums, measurement method and recorded values for the agreed features.
Optical metrology
Surface or transmitted-wavefront configuration, wavelength, aperture, field angle, PV/RMS definition and result map.
Spectral performance
Wavelength axis, sample thickness, angle, polarization, coating condition and transmission/reflection curve.
Environmental verification
Test specification, severity, sequence, specimen ID, pre/post-test results and acceptance decision.
Traceability
Instrument identification, calibration status, deviations and authorized review.
Related Product Comparison
Before You Request Samples
What temperature can the finished dome withstand?
Is an aerospace qualification report included?
Can we request a relevant sample or report?
How is delivery confirmed?
Send Your Dome Drawing for Technical Review
Tel: +86 185 6503 2888
Need Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.









