Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888
Home / All / Choose AG/AR/AF Coated Glass for Display Projects

Choose AG/AR/AF Coated Glass for Display Projects

Mar 28,2026

How to Choose AG, AR and AF Coated Glass for Display Projects

Choosing cover glass for an automotive display, industrial control screen, public kiosk or consumer device starts with the viewing environment and the way people use the screen. Reflected lights, fingerprints, cleaning routines and fine-detail visibility can each lead to different surface requirements.

AG, AR and AF serve different functions. Use this guide to compare those functions, select a suitable combination and prepare the information needed for a custom quotation. For detailed factory-control applications, see our AG, AR and AF selection guide for industrial HMI screens.

Compare the Three Surface Functions

TreatmentPrimary purposeWhat to specifyWhat to check
AG: anti-glareScatter reflected light so distracting reflected images are less concentrated.Haze, gloss, surface appearance and clarity requirements.Text clarity, sparkle and reflected appearance on the intended display.
AR: anti-reflectionReduce reflection under defined optical conditions.Wavelength band, angle, treated faces and reflectance or transmission target.Finished-part optical performance, reflection color and durability.
AF: anti-fingerprintImprove residue removability and surface cleanability.Cleaning procedure, contact-angle method and wear requirements where relevant.Fingerprint appearance, cleaning performance and performance after wear.

AG changes the distribution of reflected light; it does not automatically establish a low total-reflection specification. AR reduces reflection within the specified conditions. AF supports cleaning performance and does not replace either optical function.

Choose AG When Reflected Images Distract the User

AG surfaces use a controlled texture to diffuse reflected light. Depending on the construction, the texture may be produced by glass etching or an applied surface treatment. Do not assume that every product described as AG glass uses the same process.

Haze and gloss are useful selection parameters, but higher haze is not automatically better. Compare candidate finishes on the intended display: pixel density, viewing distance, brightness and glass-to-display spacing can affect clarity and sparkle.

If your initial design calls for a haze range such as 5% to 30%, treat it as a candidate range for sample evaluation, not as a universal requirement for every display. Agree on the final target, tolerance and measurement method after the application review.

Read our guide to specifying an AG display surface for process and evaluation considerations.

Choose AR When Surface Reflection Reduces Contrast

AR coatings reduce reflection using an optical design matched to the substrate and operating conditions. For display cover glass, the quotation should identify the relevant spectral band, incidence angles, coated faces and whether measurements apply to the glass alone or to a bonded assembly.

A target such as reflectance below 1% is incomplete without those conditions and a definition of whether it is an average or maximum value. Similarly, a transmission figure needs a defined measurement band and component configuration.

Lower reflection can improve visibility in ambient light. Any reduction in required display power depends on the complete display design and operating brightness; AR glass alone does not establish a power-saving result.

Choose AF When Touch and Cleaning Drive the Requirement

AF treatments can reduce residue adhesion and make fingerprints easier to remove. They do not eliminate every fingerprint, establish antimicrobial performance or guarantee compatibility with every cleaning chemical.

A water contact-angle target such as 110 degrees or higher may be included where appropriate, but it cannot alone demonstrate fingerprint visibility, oil repellency or service life. Specify the test method and evaluate cleaning and wear performance on the finished surface.

For a focused explanation of the distinction, see our comparison of anti-glare and anti-fingerprint treatments.

Match the Combination to the Display Project

ApplicationCandidate approachValidation priority
Industrial control screensEvaluate AG for overhead reflections; add AF for frequent touch. Consider AR where lower reflection is needed.Readability, touch usability, cleaning and coating durability.
Automotive displaysCompare AR, AG and AF individually and in compatible combinations.Viewing angles, reflection color, sparkle and project-specific environmental requirements.
Outdoor kiosks and digital signageEvaluate AR with brightness and bonding. Add AG where the reflected-image appearance requires it, and AF where cleaning or touch warrants it.Sunlight visibility, weather exposure and service cleaning conditions.
Indoor high-resolution displaysCompare a clear AR surface with suitable AG textures; add AF where useful.Fine-detail clarity, sparkle and reflected appearance.
Shared touch terminalsEvaluate AF alongside the optical treatment needed for the lighting environment.Residue removability, touch feel and repeated cleaning.

A triple treatment is an option, not a requirement for every outdoor or automotive screen. Validate the finished surface combination rather than assuming results from its individual layers.

For outdoor projects, continue with our cover glass selection guide for outdoor kiosks.

Review Substrate, Strengthening and Printed Areas

Coating selection is only part of the component specification. Confirm the glass grade, thickness, outline, edge profile, holes, strengthening route, printed border and clear viewing area. Mark coating exclusions, bonding zones and any sensor or camera apertures on the drawing.

Strengthening and surface treatment address different requirements. Use our chemical strengthening and AF coating guide when reviewing the substrate and surface requirements together.

Agree on dimensional inspection, cosmetic zones, coating tests and documentation before production approval. Review our custom glass manufacturing capabilities when discussing the proposed process and inspection scope.

Connect the Selection to Products and a Project Example

For an application reference, read the industrial HMI project using AR and AF coated cover glass. A case example supports discussion; its requirements should not be assumed to apply to a different assembly.

Prepare a Complete Coated Glass RFQ

Use the custom optics RFQ preparation checklist to organize a comparable quotation request. For display cover glass, include:

  • Application, lighting, display model or pixel density and viewing conditions.
  • Controlled drawing revision, substrate grade, dimensions, thickness and tolerances.
  • AG, AR and AF functions required on each face, with relevant optical and cleaning targets.
  • Printing artwork, clear areas, bonding interfaces and coating exclusions.
  • Environmental exposure, cleaning agents, wear tests and acceptance methods.
  • Prototype and production quantities, required schedule, destination and reports.

If the coating combination is undecided, state the functional priorities and ask for options. Confirm the material, coating construction, inspection scope and approved drawing before production.

Discuss Your Display Cover Glass Project

Send Dongguan Felix Glass Co., Ltd. your drawing, application details and quantities for a project-specific review. Lead time and final specifications are confirmed in the quotation.

Send Your Drawing and Request a Quote

If the form does not load, email james@felixglass.com or call +86 185 6503 2888.

This guide supports initial selection. Numerical examples are specification discussion points, not universal product guarantees. The agreed drawing, test conditions and order define the supplied component.

James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News