Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888

IR Optical Dome for Industrial Furnace Thermal Monitoring Case Study

Update Time:2026/11/6 15:44:30
IR Optical Dome for Industrial Furnace Thermal Monitoring Case Study
IR Optical Dome for Industrial Furnace Thermal Monitoring Case Study

Case Study

IR Optical Dome for Industrial Furnace Thermal Monitoring

Custom ZnS multispectral IR dome enables continuous 8–14μm thermal imaging through high-temperature furnace wall

Customer Background

A European industrial furnace OEM needed a custom IR window dome to mount on their continuous annealing furnace. The dome must withstand external temperatures up to 200°C while allowing a LWIR thermal camera (8–14μm) to monitor the internal furnace process without opening the door.

Previous solution used a generic CaF2 window that cracked after 3 months due to thermal cycling and furnace atmosphere condensation.

Technical Challenges

High Temperature Cycling

Furnace cycles from 25°C to 200°C daily — material must resist thermal shock and avoid delamination.

LWIR Transmission 8–14μm

Thermal camera operates in 8–14μm band; dome material must transmit >70% across full range.

Furnace Atmosphere

Steam and mild chemical condensation inside furnace — coating must be durable and cleanable.

Hemispherical Shape

Customer required hemispherical dome (not flat window) to match existing camera port flange geometry.

Material Selection Process

We evaluated three candidate IR materials against the customer's requirements:

Material 8–14μm Transmission Max Temp Cost Level Selected?
Multispectral ZnS >70% (full 8–14μm) ~250°C continuous Medium ✓ SELECTED
CVD ZnSe >70% (best in 10.6μm peak) ~250°C continuous High ✗ Overkill (laser grade not needed)
Germanium Good, but absorbs above 100°C ~80°C limit High ✗ Fails temp requirement

We recommended multispectral CVD ZnS as the optimal balance of LWIR transmission, temperature resistance and cost. Learn more about material options in our ZnS optical glass material guide.

Our Solution

  • Material: CVD multispectral ZnS, polished to optical grade
  • Geometry: Hemispherical dome, OD 89mm, wall thickness 4mm
  • Coating: Broadband IR AR coating (7–14μm), designed for high-temperature operation
  • Mounting: Flange ground to customer's furnace port drawing, O-ring groove for hermetic seal
  • Tolerance: Surface quality 60/40, transmission >70% across 8–14μm band

Test Results & Field Performance

>72%
Average Transmission (8–14μm)
>12 months
Continuous Furnace Operation
0 failures
Thermal Cycle Tests Passed

Customer reported stable thermal imaging readings and no dome cracking or coating delamination after 12+ months of continuous furnace operation. They have since placed repeat orders for 12 additional furnace units.

Related Resources

  • Industry Solutions
  • Customer Success Stories
Industrial Automation Touch Cover Glass
Industrial Automation

Provide a stable human-computer interaction experience for long-term operating equipment.

Medical Display Optical Glass
Medical Equipment

Supports gloved operation, high stability and long-term validation.

Payment Terminal Touch Glass
Payment Terminals

High cost-performance ratio, fast import.

Outdoor Display Cover Glass
Outdoor

Sunlight-visible, waterproof, and resistant to violent damage.

Farm & Construction Vehicle Touch Glass
Farm Machinery & Construction Vehicles

Vibration resistant, dustproof, waterproof, all-weather operation.

Intercom System Display Glass
Intercoms System

Anti-interference, anti-glare.

Maritime & Aerospace Optical Glass
Maritime & Aerospace

Stable Interaction in Complex Environments.

Optical Glass & Professional Touch Panel Glass Processing

After a full range of optical glass products, we also provide professional deep processing for touch screen panel glass.
[Automotive Tempered Glass Solutions Provider]

[Automotive Tempered Glass Solutions Provider]

Felix Glass As a certified IATF 16949:2016 manufacturer, High-Impact Tempered Glass for New Energy Vehicle Dashboards - HD, Anti-Scratch, UV Protection, we deliver precision-engineered tempered glass solutions for next-gen EV dashboards,central control screens, and in-vehicle systems. Our certification-driven approach ensures compliance with automotive OEM standards.

[Medical Grade Tempered Glass Cover Solution]
[Medical Grade Tempered Glass Cover Solution]

[Medical Grade Tempered Glass Cover Solution]

As a leading custom tempered glass cover manufacturer, FELIX GLASS provides custom tempered glass covers for LCD screen protection, as well as FDA/CE certified custom tempered glass for portable ultrasound systems, which are ultra-thin, drop-proof, and disinfection-resistant. We specialize in providing precision engineering solutions that meet the stringent requirements of the global medical industry. Our products excel in critical medical environments with the following key advantages

Solar Control System Glass Panel
[Solar Control System Glass Panel]

[Solar Equipment Screen Glass Solutions]

As a leading global manufacturer of custom tempered glass panels, we focus on providing customized high-performance solutions for key applications such as solar photovoltaic controllers, household solar systems, energy storage devices, portable mobile power supplies and photovoltaic energy storage systems. Our tempered glass panels use cutting-edge technology and meet strict safety standards to protect LCD screens in these harsh environments.

[​Charging Station Customized Glass Solutions]
[​Charging Station Customized Glass Solutions]

[​Charging Station Customized Glass Solutions]

As an IATF 16949 certified automotive grade tempered glass manufacturer, we focus on providing high-performance solutions for electric vehicle charging station displays, combining advanced engineering technology with strict quality control. Our glass panels are carefully designed to meet the rigorous requirements of outdoor environments, ensuring durability, safety and user-friendly operation experience.

[Smart Switch Glass Panel Solution]
[Smart Switch Glass Panel Solution]

[Smart Switch Glass Panel Solution]

[Smart Switch Glass Panel Solution]
9H Scratch Resistant Tempered Glass Panel for 86mm Smart Touch Light Switch - Aluminosilicate Glass with 3M VHB Tape
 Invisible Protection, Superior Control For smart switch manufacturers and system integrators designing high-end home automation, hotel controls and commercial panels,Our carefully crafted glass panels last 3x longer than standard panels (proven over 500,000 touches).

[Customized Glass Manufacturing Solutions]
[Customized Glass Manufacturing Solutions]

[Customized Glass Manufacturing Solutions]

We have advanced glass manufacturing facilities: CNC/laser cutting and edge polishing, precision CNC machining, glass laser cutting, fully automatic hot bending machine and flip polishing equipment, precision milling countersunk holes and blind holes, precision edge molding, multi-level step surface processing, complex curved glass molding, to meet the strict design requirements of customized glass panel applications from consumer electronics to medical/industrial fields.

James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News