Provide a stable human-computer interaction experience for long-term operating equipment.
Large-Format ITO Heater Glass for Industrial HMI Display — Korea Case Study

A Korean industrial equipment manufacturer needed a heated front glass for their HMI (human-machine interface) terminal. The display operates in an environment where temperature and humidity swings cause condensation on the cover, fogging the underlying TFT panel. Off-the-shelf ITO heater glass was not available at the required size.
The challenge
- Large cover format: 724 × 418 mm — beyond the standard size range of most ITO-coated glass suppliers
- Active heating from a 24V DC control rail, without adding a separate power supply
- Optical transparency preserved for the TFT display beneath
- Opaque contacts kept outside the display's active area
Felix Glass solution
We supplied a custom ITO-heated soda-lime glass cover with the following build:
| Format | 724 × 418 mm |
|---|---|
| Substrate | Soda-lime float glass |
| ITO sheet resistance | 5 Ω/□ (low-resistance film) |
| Busbar layout | Two opposite 724 mm long edges; clear aperture kept contact-free |
| Calculated terminal resistance | ≈ 2.9 Ω (at reference temperature) |
| Supply | 24V DC |
| Calculated rated power | ≈ 200 W across 0.30 m² (≈ 660 W/m²) |
The low 5 Ω/□ sheet resistance was chosen deliberately: at 24V it delivers enough heating power to clear condensation on a large panel within a reasonable warm-up time, while the edge busbars keep the heated contacts out of the TFT viewing area.
Outcome
The heated cover was integrated into the customer's HMI terminal. The existing 24V control rail powered the heater without additional conversion electronics. The large-format ITO coating was produced and inspected in-house, with sheet-resistance mapping and optical transmission verified before shipment.
[Placeholder: insert one measured result here — e.g. "In chamber testing at 25°C / 85% RH, the panel cleared fogging within ___ minutes." Only include this if the chamber test was actually run.]
Why this project is representative
Most off-the-shelf ITO heater glass is offered at 100–300 mm formats with sheet resistances of 10–100 Ω/□. A 724 × 418 mm panel at 5 Ω/□ requires coating-line capability and sheet-resistance uniformity that smaller suppliers cannot guarantee. The project shows how a low-sheet-resistance film, paired with a standard 24V industrial rail, turns a conventional HMI cover into an actively de-fogging window.
Related resources
- How ITO film converts 24V power into heat: ITO glass heating principles: power and control
- What ITO conductive glass is and where it is used: properties and uses guide
- Specification inputs for your own heated window: custom ITO glass RFQ guide
- Industry Solutions
- Customer Success Stories
- Update TimeOct 14,2026
Felix Glass supplies high-quality fused silica laser protective windows for fiber laser cutting equipment. Low absorption and high laser damage threshold protect laser head effectively. - Update TimeOct 13,2026
Felix Glass manufactured custom AR+AF tempered cover glass for outdoor industrial HMI touch terminals. Combined anti-reflection and anti-fingerprint coating improves screen readability under strong sunlight and simplifies daily cleaning.
Supports gloved operation, high stability and long-term validation.
High cost-performance ratio, fast import.
Sunlight-visible, waterproof, and resistant to violent damage.
Vibration resistant, dustproof, waterproof, all-weather operation.
Anti-interference, anti-glare.
Stable Interaction in Complex Environments.
Optical Glass & Professional Touch Panel Glass Processing
After a full range of optical glass products, we also provide professional deep processing for touch screen panel glass.![[Automotive Tempered Glass Solutions Provider]](https://icdn.tradew.com/file/202410/1576316/jpg/8343425.jpg)

[Automotive Tempered Glass Solutions Provider]
Felix Glass As a certified IATF 16949:2016 manufacturer, High-Impact Tempered Glass for New Energy Vehicle Dashboards - HD, Anti-Scratch, UV Protection, we deliver precision-engineered tempered glass solutions for next-gen EV dashboards,central control screens, and in-vehicle systems. Our certification-driven approach ensures compliance with automotive OEM standards.
![[Medical Grade Tempered Glass Cover Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8343437.jpg)
![[Medical Grade Tempered Glass Cover Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8209139.jpg)
[Medical Grade Tempered Glass Cover Solution]
As a leading custom tempered glass cover manufacturer, FELIX GLASS provides custom tempered glass covers for LCD screen protection, as well as FDA/CE certified custom tempered glass for portable ultrasound systems, which are ultra-thin, drop-proof, and disinfection-resistant. We specialize in providing precision engineering solutions that meet the stringent requirements of the global medical industry. Our products excel in critical medical environments with the following key advantages

![[Solar Control System Glass Panel]](https://icdn.tradew.com/file/202410/1576316/jpg/8209140.jpg)
[Solar Equipment Screen Glass Solutions]
As a leading global manufacturer of custom tempered glass panels, we focus on providing customized high-performance solutions for key applications such as solar photovoltaic controllers, household solar systems, energy storage devices, portable mobile power supplies and photovoltaic energy storage systems. Our tempered glass panels use cutting-edge technology and meet strict safety standards to protect LCD screens in these harsh environments.
![[Charging Station Customized Glass Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8343446.jpg)
![[Charging Station Customized Glass Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8209141.jpg)
[Charging Station Customized Glass Solutions]
As an IATF 16949 certified automotive grade tempered glass manufacturer, we focus on providing high-performance solutions for electric vehicle charging station displays, combining advanced engineering technology with strict quality control. Our glass panels are carefully designed to meet the rigorous requirements of outdoor environments, ensuring durability, safety and user-friendly operation experience.
![[Smart Switch Glass Panel Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8343745.jpg)
![[Smart Switch Glass Panel Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8209142.jpg)
[Smart Switch Glass Panel Solution]
[Smart Switch Glass Panel Solution]
9H Scratch Resistant Tempered Glass Panel for 86mm Smart Touch Light Switch - Aluminosilicate Glass with 3M VHB Tape
Invisible Protection, Superior Control For smart switch manufacturers and system integrators designing high-end home automation, hotel controls and commercial panels,Our carefully crafted glass panels last 3x longer than standard panels (proven over 500,000 touches).
![[Customized Glass Manufacturing Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8343744.jpg)
![[Customized Glass Manufacturing Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8209143.jpg)
[Customized Glass Manufacturing Solutions]
We have advanced glass manufacturing facilities: CNC/laser cutting and edge polishing, precision CNC machining, glass laser cutting, fully automatic hot bending machine and flip polishing equipment, precision milling countersunk holes and blind holes, precision edge molding, multi-level step surface processing, complex curved glass molding, to meet the strict design requirements of customized glass panel applications from consumer electronics to medical/industrial fields.

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.









