Mohs 9 Extreme Hardness
Sapphire has Mohs 9 mineral hardness. Define erosion, cleaning and environmental tests separately; this hardness rating is not a guarantee against chipping, impact damage or coating wear.






| Share | |
|---|---|
| Categories | Sapphire Optical Dome |
| Brand | FELIX GLASS optical glass Manufacturing base |
| Product Specifications | FG-SAPPHIRE-002 |
| Material: | Synthetic single-crystal sapphire (Al2O3) |
| Shape | Hemispherical / Partial Spherical / Custom |
| Diameter | 10-250 mm reference range; drawing review required |
| Optical Quality | Scratch-dig per agreed standard and drawing |
| Surface Figure | Per drawing; wavelength, aperture and PV/RMS specified |
| Coating | Wavelength-specific AR; other treatments by review |
| MOQ | 5 pieces; single-piece prototype subject to review |
| Lead Time | Confirmed after drawing, material, coating and test review |
| Application | ROV deep sea camera, aerospace EO/IR sensor, machine vision |
| Service | Drawing review, COA report, NDA agreement, OEM ODM |
| Brand | Felix Glass |
| Unit Price | US $ 3.33-5.57 / piece |
| FOB port | shenzhen/shanghai |
| Terms of Payment | L/C, D/A, D/P, Western Union |
A sketch or preliminary dimensions are enough to start. Quote basis. Final pricing and lead time depend on the approved geometry, material grade, coating, inspection scope and order quantity. Include any required tooling or validation in your request.What to Send for a Quote
Sapphire dome · cross section
H · Dome height | t · Wall thickness
ØD · Outside diameter
Mounting interface
Schematic only, not to scale. Use the approved drawing for dimensions and tolerances.
The displayed unit-price tiers and minimum order quantity are reference values. Ask us to confirm the price for your exact geometry, material, coating, inspection scope and quantity. Include the sealing interface, coating band and any pressure-test requirements. Specify prototype and production quantities separately. The written quotation identifies the configuration and quantity tier it covers and states any separate tooling or testing charges.
For an underwater housing, send the dome diameter, mounting interface and target depth or pressure differential. For a sensor housing, send the diameter, operating wavelength band and mounting constraints. A sketch and sample quantity are enough to start a review of geometry, coating and project-specific validation.
Felix Glass brings 19+ years of optical glass manufacturing and processing experience to custom single-crystal sapphire domes. We review hemispherical and partial-spherical covers for ROV cameras, airborne sensors and industrial vision around your drawing, operating wavelength, mounting interface and acceptance requirements. Geometry, surface quality, coating and test scope are confirmed before quotation. Current listing MOQ: 5 pieces | Single-piece prototype requests subject to review | Inspection scope agreed per order Consider sapphire where surface abrasion resistance and optical protection are priorities. Dome suitability depends on geometry, material quality, support, seals and operating conditions. Mohs hardness does not establish pressure capacity or the imaging performance of the assembled system. Sapphire has Mohs 9 mineral hardness. Define erosion, cleaning and environmental tests separately; this hardness rating is not a guarantee against chipping, impact damage or coating wear. Ultra-precision polishing + custom AR coating optimized for UV, VIS, NIR or mid-IR wavelength bands. Specify diameter, inner and outer radii, wall thickness, flange, edge chamfer, clear aperture, surface quality and curved-surface figure separately. Base material: synthetic single-crystal sapphire (Al₂O₃). BK7/K9 optical glass alternative available for non-extreme environment projects to reduce cost. Select the application requirements below and supply a project-specific verification plan. Suitability for a new assembly must be evaluated; an application label alone does not establish qualification. Provide working pressure differential, depth, pressure cycles, proof-test requirement, wall geometry, support and seal design. Agree structural assessment and hydrostatic testing responsibilities. Evaluate the optical path with water outside and the specified internal medium. Define the exact band and field of view. Sapphire is considered for visible, NIR and selected MWIR applications; do not specify it as an 8–12 µm LWIR transmitting dome. Transmission requires review of thickness, orientation, angle and coating. Flight or space qualification requires an agreed test program. Provide camera resolution, field of view, lighting, mounting and cleaning conditions. Evaluate a representative dome on the intended camera before approving image quality and coating durability. Diameter, radius, wall thickness, flange or edge form, optical zone and mounting method are checked. Sapphire blank size, machining allowance and coating route are planned according to the application. Diamond tooling and controlled polishing are used to form the dome and improve optical clarity. Review AR by wavelength, incidence angle and surrounding media. AF and AG require separate image-quality and durability review rather than being default options. Finished parts are checked for dimensions, surface quality, coating appearance and shipment protection. We accept low-volume prototype and large batch OEM orders. To get fast, accurate quotation, send your dome 2D/3D drawing, target quantity, material selection, coating wavelength, tolerance, scratch-dig requirement, working pressure/environment and inspection standards. Sample and bulk lead time depends on geometry complexity, coating and inspection criteria. Our optical engineers review manufacturability before quotation to avoid unexpected production risk. The project prioritizes surface hardness and optical protection, with pressure, thermal and coating performance validated for the actual assembly. The part needs optical clarity but does not require sapphire hardness or severe environment resistance. The optical system has a defined wavelength band, reflection target, fingerprint exposure or glare concern. Yes. We manufacture per your 2D/3D drawing, custom outer diameter, spherical radius, wall thickness, flange geometry and optical zone. Submit the required scratch-dig grade and inspection standard. For a curved dome, define surface figure and transmitted wavefront separately, including wavelength, aperture, PV/RMS and test arrangement. Feasibility is confirmed for the specific size and geometry. Agree the inspection plan and report contents before order: drawing revision, material lot, sample identity, measured characteristics, test configuration and acceptance results. Request a releasable report example during quotation. NDA arrangements can be discussed for confidential drawings. The current listing minimum is 5 pieces. Ask for separate review if one prototype is needed. Lead time is confirmed in the quotation after drawing, material, coating and inspection requirements are reviewed. Subsea suitability is assessed for the finished dome, support and seal arrangement. Provide pressure differential, duration, cycles, proof-test criteria and assembly drawing. Material hardness alone cannot establish a safe operating depth. Submit your 2D/3D drawing, target quantity, wavelength/coating spec, working pressure, scratch-dig requirement and inspection criteria. Share your optical requirement, 2D/3D drawing, coating target, working pressure and quantity. Felix Glass optical engineers will evaluate manufacturability, estimate lead time and provide formal quotation for your custom sapphire dome project. Custom pricing depends on the approved dimensions, material, coating, quantity and inspection plan. Request confirmation of the specification covered by the displayed listing price. Prepare your enquiry using our custom optics RFQ preparation checklist.Custom Sapphire Optical Dome | Hemispherical Single Crystal Sapphire Dome
What Mohs 9 Sapphire Dome Solves For Your Optical System
Mohs 9 Extreme Hardness
Tunable Optical Transmission
Full Drawing Customization
Material & Coating Engineering Specifications
Key Custom Sapphire Dome Specifications
Parameter
Capability
Product Type
Custom Sapphire Optical Dome, Hemispherical / Partial Spherical Dome
Model reference
FG-SAPPHIRE-002
Material
Synthetic single-crystal sapphire
Dome Size Range
Outer diameter reference enquiry range: 10–250 mm. Radius, wall thickness, blank availability and achievable tolerances reviewed as one combination
Optical Quality
Scratch-dig requests from 60/40 to 10/5 subject to geometry and process review. Specify standard/revision, inspected surfaces and zones. For surface figure or transmitted wavefront, define wavelength, aperture, PV/RMS, field angle, test configuration and permitted removals; no universal λ/10 capability is assumed
Functional coating
Uncoated or wavelength-specific AR after review. State coated faces, wavelength band, incidence angles, polarization, surrounding media and reflection/transmission limits
Environmental Resistance
Pressure, thermal cycling, vibration, salt exposure and cleaning tests specified by project, with severity, sample quantity and pass/fail criteria agreed before order
MOQ & Lead Time
Current listing MOQ: 5 pieces. Single-piece prototypes subject to separate review. Prototype and production lead times quoted after drawing approval, blank availability, coating and test scope are confirmed
Inspection Service
Dimensional metrology, surface inspection, optical test. COA report available, NDA supported
AR Coated Sapphire Dome Typical Applications
ROV & Deep Marine Cameras
Aerospace & EO/IR Sensors
Industrial Vision Equipment
How Felix Glass Reviews a Sapphire Optical Dome RFQ
Drawing Review
Material Planning
Grinding and Polishing
Coating Review
Inspection and Packing
From Prototype Sampling to Mass Production Orders
When to Choose Sapphire Instead of Standard Optical Glass
Choose Sapphire When
Review BK7 or K9 When
Confirm Coating When
Compare Related Sapphire Dome Options
Questions Before Ordering Mohs 9 Sapphire Optical Dome
Can sapphire dome diameter and spherical radius be fully customized?
How are surface quality, figure and wavefront specified?
Can you supply COA inspection report? Is NDA available?
Do you accept prototype sample orders? What is lead time?
Is sapphire dome suitable for deep sea ROV high pressure application?
What documents do I need to send to get fast quotation?
Send Your Sapphire Dome Drawing for Engineering Review & Quotation
Before specifying this component, review our sapphire dome selection and acceptance guide for material orientation, coating, geometry and inspection planning. Pressure and temperature suitability require validation of the mounted assembly.
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQWe supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.