Custom NIR Bandpass Filter | 400-1100nm AR ITO - Felix Glass






Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
400–1100nm Bandpass Filter
with AR & ITO Coating on Fused Silica
Custom near-infrared broadband bandpass filter on high-purity fused silica, combining dual anti-reflection coating with a conductive ITO layer. Delivers ≥90% peak transmission across 400–1100 nm while providing electromagnetic shielding for optical windows in industrial inspection, machine vision, spectral analysis and medical IR imaging.
- Broad Passband 400 nm – 1100 nm (Visible to NIR)
- Peak Transmission ≥ 90% Within Passband
- High-Purity Fused Silica Quartz Substrate
- Dual AR Coating + Conductive ITO Layer
- EMI / RFI Shielding for Optical Windows
- Custom Round, Square & Special Shapes
- Custom Out-of-Band Blocking per Drawing
Why Do Optical System Engineers Switch to Our AR+ITO Filters?
| Pain Points With Generic NIR Filters | Felix Glass Solution |
|---|---|
| Generic AR-only filter has no conductive layer, EMI noise leaks into the detector | Dual AR + ITO stack: AR boosts transmission, ITO layer provides surface conductivity and EMI/RFI shielding for the optical window. |
| Peak transmission only 80–85%, loses signal margin in low-light NIR inspection | Precision multi-layer AR coating engineered for ≥90% peak across 400–1100 nm, with spectral curve tested and provided per lot. |
| BK7 substrate absorbs at NIR edge, drifts under wide-temperature operation | High-purity fused silica substrate with low intrinsic absorption and excellent thermal stability for industrial temperature cycling. |
| Standard off-the-shelf size cannot fit your instrument housing or optical path | Custom round disc, square sheet, special outline, thickness and edge blackening to your mechanical drawing. |
| Out-of-band blocking not specified, stray light degrades measurement accuracy | Custom blocking levels and edge blackening per your spectral requirement, not a one-size-fits-all passband. |
| Supplier cannot support small prototype batch for instrument R&D | Prototype sampling, small trial batches and mass production all supported, with spectral data for each sample. |
| No spectral test report delivered, hard to validate incoming quality | Every filter passes UV-Vis-NIR spectrophotometer test; transmission curve and surface inspection report ship with the lot. |
Why Optical Instrument Manufacturers Work With Felix Glass
Optical Glass & Coating Experience
Broad Visible-to-NIR Passband
Peak Transmission in Passband
Low Absorption, Thermally Stable
Out-of-Band Suppression per Drawing
Transmission Curve per Lot
*Actual peak transmission, blocking and AOI depend on coating design and substrate.
One supplier from fused silica cutting and polishing to precision AR+ITO coating, edge blackening and spectrophotometer testing. We control the full optical stack in-house, so your NIR filter arrives dimensionally accurate, spectrally validated and ready to integrate.
AR+ITO Bandpass Filters Engineered for Your Optical System
NIR Industrial Inspection & Machine Vision
Broad 400–1100 nm passband for near-infrared defect inspection, sorting, surface measurement and automated machine vision systems.
- High transmission across visible + NIR
- Fused silica for stable thermal operation
- Edge blackening to suppress stray light
- Custom format to fit camera housing
Recommended Solution: Fused Silica + AR Coating + Edge Blackening
Discuss Your Inspection System →Spectral Analysis & Measurement Instruments
Custom bandpass for spectrophotometers, color measurement, optical test benches and laboratory analytical instruments requiring defined passbands.
- Custom center wavelength and bandwidth
- Specified out-of-band blocking levels
- Spectral curve delivered per lot
- 0° standard, custom AOI supported
Recommended Solution: Fused Silica + Precision AR Stack + Custom Blocking
Discuss Your Spectral Requirement →EMI Shielded Conductive Optical Window
When your optical window sits in an electrically noisy environment, the ITO layer provides surface conductivity for EMI/RFI shielding without blocking the optical passband.
- ITO layer adds conductive coating over AR
- Blocks electromagnetic interference
- Maintains ≥90% optical transmission
- Ideal for sealed enclosures and detector windows
Recommended Solution: Fused Silica + AR + ITO Conductive Stack
Discuss Your Shielding Requirement →Medical IR Imaging & Detection
Custom bandpass filters for medical infrared imaging, thermography, clinical detection and life-science optical instruments.
- Biocompatible fused silica substrate
- Precision passband for medical detector
- Clean packaging for medical assembly
- Optional anti-bacterial surface treatment
Recommended Solution: Medical-grade Fused Silica + AR + ITO Stack
Discuss Your Medical Optics Project →Core Optical Specifications
| Item | Parameter |
|---|---|
| Passband Range | 400 nm – 1100 nm broadband transmission (Visible to NIR) |
| Peak Transmission | ≥ 90% within 400–1100 nm spectrum |
| Substrate | High-purity fused silica quartz glass |
| Functional Coating | Dual AR anti-reflection coating + conductive ITO coating |
| Shape | Custom round disc, square sheet, arbitrary tailor-made dimensions |
| AOI (Angle of Incidence) | 0° standard, custom incident angle supported |
| Out-of-Band Blocking | Custom suppression level available per drawing |
| Edge Treatment | Edge blackening, precision grinding, chamfering optional |
| Thickness | Custom per requirement (standard 1 mm – 6 mm range) |
| Testing | UV-Vis-NIR spectrophotometer spectral curve per lot |
*Subject to coating design, substrate and customer-specific spectral requirements.
Typical AR+ITO Filter Project Examples
Machine Vision NIR Inspection Window
Customer Requirement
Automated optical inspection OEM needed a sealed NIR window for a production-line camera, 400–1100 nm passband, EMI shielding inside an enclosed metal housing, custom round format with edge blackening.
Our Solution
Fused silica substrate precision-cut to round format, dual AR coating for high transmission, ITO conductive layer for EMI shielding, edge blackening to suppress stray light, spectrophotometer curve per sample.
Typical Project Outcome
Samples approved for camera integration, EMI performance met spec, moved to monthly batch supply for inspection line deployment.
Spectrometer Custom Bandpass Filter
Customer Requirement
Scientific instrument manufacturer needed custom bandpass filters with specified out-of-band blocking for a laboratory spectrophotometer, small prototype batch with spectral curves for calibration.
Our Solution
Fused silica substrate, precision coating stack designed for target passband and blocking, custom edge grinding, each filter tested on UV-Vis-NIR spectrophotometer with delivery curve.
Typical Project Outcome
Prototype filters delivered with spectral data, validated against instrument calibration, approved for follow-up production batch.
From Spectral Drawing to Tested AR+ITO Filter
01 Requirement Review
Verify passband, peak transmission, blocking level, AOI, dimension and substrate requirement.
02 Substrate Cutting
Fused silica cutting to round, square or custom outline per mechanical drawing.
03 Polishing & Grinding
Precision surface polishing and edge grinding to optical flatness specification.
04 AR Coating Design
Multi-layer AR coating engineered for ≥90% peak across 400–1100 nm.
05 ITO Conductive Layer
Sputtered ITO over AR stack for surface conductivity and EMI shielding.
06 Edge Blackening (Optional)
Light-absorbing edge treatment to suppress stray light in imaging systems.
07 Spectral Testing
UV-Vis-NIR spectrophotometer measurement of transmission curve per lot.
08 QC & Clean Packaging
Surface inspection, dimensional check and clean packaging ready for integration.
Why Start With a Filter Prototype?
01 Validate Spectral Performance
Test the actual transmission curve and blocking level in your optical setup before committing to volume.
02 Verify Mechanical Fit
Confirm dimension, edge treatment and mounting format fit your instrument housing and optical path.
03 Reduce Integration Risk
Validate AR+ITO stack performance in your real detector and EMI environment before production order.
Not Sure Which Filter Configuration You Need?
| Your Application | Recommended Solution |
|---|---|
| Machine vision, NIR industrial inspection | Fused silica + AR + edge blackening, custom round/square format |
| EMI-shielded optical window in sealed enclosure | Fused silica + AR + ITO conductive stack |
| Spectrophotometer, spectral measurement instrument | Custom passband + specified out-of-band blocking, spectral curve per lot |
| Medical IR imaging, thermography | Medical-grade fused silica + AR+ITO, clean packaging |
| High-power laser or laser protection window | Consider our longpass fused silica filter with AR+ITO coating |
| Wide-temperature industrial environment | Fused silica over BK7 for thermal stability and low absorption |
| Small R&D batch or instrument validation | Prototype sampling with spectral data for your calibration |
Still unsure about coating stack or blocking level? Ask Our Optical Engineers for Free Guidance
Frequently Asked Questions
Request Custom 400-1100nm AR+ITO Bandpass Filter
Tell us your spectral requirement and mechanical drawing. Our optical engineers will design a matched coating stack and quote fast.
Before You Send Your Inquiry, Prepare These Inputs
- Passband requirement: 400-1100 nm standard, or custom center wavelength / bandwidth
- Peak transmission target: e.g. ≥90% in passband
- Out-of-band blocking: blocked wavelength regions and required optical density
- Substrate: fused silica (recommended for NIR) or other material
- Dimension & shape: round diameter, square size, thickness, special outline
- AOI: 0° standard, or custom incident angle
- ITO / EMI requirement: conductive ITO layer for shielding, or AR-only
Free optical engineering review · spectral curve per lot · 19+ years optical coating manufacturing
Explore More Optical & ITO Coating Resources
- AR / AG / AF / DLC / ITO coating comparison — choose the right optical coating for your window
- What is ITO conductive glass? Properties and uses — background on the conductive layer
- ITO glass transmission and conductivity trade-offs — optical vs electrical performance
- How to specify custom ITO glass RFQ — technical inputs needed for an accurate quote
- China custom optical component manufacturer — 19+ years factory capability and coating QC
Have a NIR Filter or Optical Window Project? Let's Review It.
Send your spectral requirement or mechanical drawing. You don't need to finalize every coating parameter. Our optical engineers will recommend the right AR+ITO stack for your system.
Free optical engineering review · spectral curve per lot · OEM/ODM manufacturing
Need Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.








