Custom Longpass Fused Silica Filter | AR ITO Laser Window - Felix Glass






Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
OEM Longpass Fused Silica Filter
with AR & ITO Coating for Laser Protection
High-purity JGS1 fused silica longpass filter with broadband AR and conductive ITO composite coating. Blocks short-wave stray light below your custom cut-off wavelength, transmits ≥90% in the target band, eliminates static dust attraction and protects laser internal optics from UV to near-IR.
- JGS1 Bubble-Free Fused Silica Substrate (Deep UV to 2100nm)
- Broadband AR + Conductive ITO Composite Coating
- ≥90% Target-Band Transmittance, OD2–OD6 Blocking Depth
- Custom Cut-Off Wavelength, Size, Thickness & Shape
- Anti-Static ITO Layer Prevents Dust & Beam Distortion
- 60-40 Scratch-Dig Standard, 40-20 High-Precision Upgrade
- Acid / Alkali Resistant, Stable Under Long Laser Irradiation
Why Laser & Optical Instrument OEMs Switch to Our Longpass Filter
| Pain Points With Generic Longpass Filters | Felix Glass Solution |
|---|---|
| Short-wave stray light leaks through, damaging internal laser optics and sensors | Custom longpass cut-off with OD2–OD6 blocking depth tailored to your laser wavelength and application. |
| Surface reflection loss drops laser output efficiency | Broadband AR coating lifts target-band transmittance to ≥90%, reducing energy loss. |
| Static charge on filter surface attracts dust, distorting laser beam and increasing maintenance | Conductive ITO layer eliminates static accumulation, keeping the optical window clean in production environments. |
| Ordinary BK7 filters turn cloudy or deform under long UV laser exposure | JGS1 fused silica substrate transmits deep UV, resists thermal expansion and stays stable under continuous laser irradiation. |
| Off-the-shelf size cannot fit custom laser head or spectrometer window | Custom square / round dimensions, thickness and cut-off wavelength matched to your mechanical drawing. |
| No per-lot spectral data, hard to validate incoming quality for production | Every batch ships with spectral transmission, blocking depth and coating adhesion test report. |
| Supplier cannot support prototype to volume ramp for new laser model | Prototype sampling, small trial batches and mass OEM supply all supported. |
Why Laser OEMs & Instrument Builders Trust Felix Glass
Optical Filter Manufacturing
Bubble-Free Fused Silica
Target-Band Transmittance
Deep UV to NIR Range
Custom Blocking Depth
Spectral & Adhesion Data
*Actual transmittance, cut-off and OD depend on coating design and customer specification.
One supplier from JGS1 fused silica blank polishing to AR+ITO composite coating, spectral testing and laser durability aging. We control the full filter stack in-house, so your laser head, spectrometer or inspection module arrives dimensionally accurate, spectrally tested and ready to integrate.
Longpass Filters Engineered for Your System
Industrial Laser Protection Windows
Longpass windows for fiber laser, UV laser marking and cutting machines, blocking stray short-wave light and protecting internal optics.
- Custom cut-off matched to laser wavelength
- OD4-OD6 deep blocking for high-power systems
- Anti-static ITO prevents dust on production floor
- JGS1 substrate resists laser-induced damage
Recommended Solution: JGS1 + AR + ITO, OD4+ Blocking
Discuss Your Laser Head →UV-Vis-NIR Spectral Analysis
Longpass filters for laboratory spectrometers and spectral measurement instruments, cutting stray short-wave background.
- 185nm deep UV transmission on JGS1
- ≥90% transmittance in analysis band
- Custom cut-off wavelength per application
- 40-20 high-precision surface option
Recommended Solution: JGS1 + AR Coating, 40-20 Surface
Discuss Your Spectrometer →Semiconductor Wafer Inspection
Optical filter modules for wafer defect inspection and machine vision long-wave imaging, rejecting stray ambient short-wave light.
- High transmission in detection band
- Anti-static ITO prevents particle attraction
- Custom size to inspection module window
- Stable performance in cleanroom environment
Recommended Solution: JGS1 + AR + ITO, Custom Module Size
Discuss Your Inspection System →Medical Laser & Beauty Devices
Safety longpass assemblies for medical laser diagnosis and aesthetic laser equipment, blocking harmful short-wave leakage.
- Medical-grade JGS1 fused silica
- Deep OD blocking for patient safety
- Custom shape to device optical path
- Per-lot spectral certificate available
Recommended Solution: Medical JGS1 + Deep OD Blocking
Discuss Your Medical Device →Core Technical Specifications
| Item | Parameter |
|---|---|
| Substrate | Bubble-free high-purity JGS1 fused silica quartz |
| Filter Type | Longpass cut-off filter, custom cut-off wavelength |
| Composite Coating | Broadband AR anti-reflection + transparent conductive ITO |
| Target-Band Transmittance | ≥ 90% |
| Blocking Depth | OD2 – OD6 customizable for short-wave rejection |
| Working Spectrum | 185 nm – 2100 nm (deep UV to near infrared) |
| Surface Quality | 60-40 scratch-dig standard, upgradeable to 40-20 |
| Durability | Acid / alkali resistant, anti-scratch, anti-static, stable under long laser irradiation |
| Custom Parameter | Custom square / round size, thickness, cut-off wavelength, ITO sheet resistance |
| Applications | Laser protection windows, spectrometers, wafer inspection, machine vision, medical laser, anti-stray-light windows |
*Subject to coating design, size, thickness and customer specification.
Typical Longpass Filter Project Examples
UV Laser Marking Machine OEM
Customer Requirement
Laser equipment manufacturer needing longpass windows for 355nm UV laser heads, blocking stray visible light, anti-static for production floor, custom size to laser head window.
Our Solution
JGS1 fused silica longpass with cut-off matched to 355nm, AR coating for high UV transmittance, ITO anti-static layer, custom size to mechanical drawing, OD4 blocking.
Typical Project Outcome
Bulk filter supply approved, integrated into customer's new laser model, spectral test report shipped per batch.
Wafer Inspection Module Prototype
Customer Requirement
Semiconductor inspection system builder needing longpass filter for visible-to-NIR detection module, blocking ambient short-wave stray light, anti-static ITO for cleanroom, 40-20 surface precision.
Our Solution
JGS1 blank double-sided polished to 40-20, AR+ITO composite coating, custom cut-off wavelength per detection band, small-batch prototype delivery with spectral curve.
Typical Project Outcome
Prototype filters delivered on schedule, integrated into inspection module, validated against stray-light rejection spec, approved for follow-up production.
From Laser Drawing to Tested Longpass Filter
01 Requirement Review
Verify cut-off wavelength, target band, OD, size, thickness and laser type.
02 JGS1 Blank Cutting
High-purity fused silica cut to filter outline, square or round.
03 Double-Sided Polishing
Precision polishing to 60-40 or 40-20 scratch-dig surface.
04 AR Coating
Broadband AR vacuum deposition to boost target-band transmittance.
05 ITO Composite Layer
Conductive ITO layer applied for anti-static and EMI shielding.
06 Edge Chamfer
Edge grinding and chamfering for safe handling and mounting.
07 Spectral Testing
Transmittance curve, blocking depth and coating adhesion testing per batch.
08 Laser Aging Test
Optional laser durability aging under customer-specified power and wavelength.
Why Start With a Longpass Filter Prototype?
01 Validate Spectral Performance
Test actual cut-off slope and blocking depth in your optical setup before volume.
02 Verify Fit & Durability
Confirm size, surface quality and coating durability under your laser power.
03 Reduce OEM Risk
Prototype lot ships with spectral curve and adhesion data for engineering sign-off.
Not Sure Which Longpass Configuration You Need?
| Your Application | Recommended Solution |
|---|---|
| UV laser marking / cutting machine window | JGS1 longpass, AR coating, OD4 blocking, anti-static ITO |
| Fiber laser (1064nm) protection window | Longpass cut-off ~800-900nm, AR for NIR, custom size |
| UV-Vis-NIR spectrometer | JGS1 longpass, 40-20 surface, AR coating, no ITO option |
| Wafer / machine vision inspection module | JGS1 + AR + ITO, custom module size, visible-to-NIR cut-off |
| Medical laser / beauty device safety | Medical-grade JGS1, deep OD blocking, per-lot certificate |
| Cleanroom optical window (anti-static required) | AR + ITO composite, custom sheet resistance |
| Not sure — send your wavelength and drawing | Ask our engineers for free recommendation |
Still unsure about cut-off or OD? Ask Our Optical Engineers for Free Guidance
Frequently Asked Questions
Request Custom Longpass Fused Silica Filter
Tell us your laser wavelength and cut-off requirement. Our engineers will recommend the right coating stack for your system.
Before You Send Your Inquiry, Prepare These Inputs
- Application: laser protection window, spectrometer, wafer inspection, machine vision, medical laser, or anti-stray-light window
- Cut-off wavelength: e.g. block below 400nm, 500nm, 700nm, 800nm
- Target band & transmittance: e.g. 400-1100nm, ≥90%
- Blocking depth: OD2, OD3, OD4, OD5 or OD6
- Size, thickness & shape: round, square, custom outline per drawing
- Surface quality: 60-40 standard or 40-20 high precision
- ITO requirement: anti-static only, or specific sheet resistance
- Quantity: prototype, small batch, or mass OEM supply
Free engineering review · per-lot spectral test report · 19+ years optical filter manufacturing
Explore More Optical Coating Resources
- AR / AG / AF / DLC / ITO coating comparison — choose the right coating stack for your optical window
- ITO glass transmission and conductivity explained — understand how ITO affects optical performance
- Custom ITO glass RFQ guide — prepare technical inputs for an accurate quote
- Custom optics RFQ checklist — complete technical inquiry preparation
Have a Laser or Instrument Filter Project? Let's Review It.
Send your cut-off wavelength or filter drawing. You don't need to finalize every spec. Our engineers will recommend the right longpass + AR + ITO configuration for your system.
Free engineering review · per-lot spectral data · OEM / ODM manufacturing
Need Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.









