Flanged Optical Dome Port | One-Piece Integrated Subsea Camera Dome






Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
Flanged Optical Dome Port | Integrated One-Piece Flange Subsea Camera Dome
Our flanged optical dome ports feature an integrated one-piece flange, precision machined together with the hemispherical dome. Built for deep sea ROV, AUV and underwater camera housing, this all-in-one design simplifies assembly, supports O-ring watertight sealing and eliminates separate retaining rings. As a China custom optical dome manufacturer with 23+ years of subsea optics experience, we offer rated options for 3000m or 7000m water depth, diameter 20–60 mm. No stock, fully custom fabrication.
Key Features of Flanged Optical Dome Port
- One-piece integrated flange + dome, no separate clamping ring required
- Depth rating optional: 3000m (300 bar) / 7000m (700 bar)
- Material: JGS1 Fused Silica / C-axis Sapphire (for 7000m)
- Diameter range: 20 mm ~ 60 mm
- Precision O-ring groove / sealing step on flange face
- Optional broadband AR anti-reflection coating (VIS / NIR)
- FEA pressure simulation + hydrostatic pressure test & certificate available
- Easy bolt mounting, excellent seawater corrosion resistance
Typical Applications
- Deep sea ROV / AUV camera imaging systems
- Subsea inspection camera housings
- Marine scientific observation instruments
- Offshore underwater visual monitoring equipment
- Subsea LiDAR optical windows
Technical Specification Table
| Item | Spec |
|---|---|
| Depth Rating | 3000m or 7000m (custom selected) |
| Material | Fused Silica / Sapphire |
| Outer Dome Diameter | 20–60 mm, custom |
| Flange Geometry | One-piece integrated flange, custom OD, bolt holes, O-ring step |
| Surface Quality | 60/40 |
| Surface Accuracy | λ @632.8nm |
| Coating | Optional Broadband AR coating |
| MOQ | 5 pcs; 1 pc sample acceptable |
| Lead Time | 3–6 weeks (depends on depth rating & flange complexity) |
| Test | FEA simulation + hydrostatic pressure test report optional |
Material Selection Guide for Flanged Dome
JGS1 Fused Silica is preferred for 3000m flanged dome, balanced strength, optical performance and cost. For 7000m ultra-deep working condition, C-axis cut Sapphire is the primary recommendation due to extreme compressive strength. Custom thick-wall fused silica is available as alternative with mandatory FEA validation. BK7 and Acrylic are not suitable for 7000m service. For details on BK7 material properties, see our N-BK7 optical glass material introduction.
Material Selection Chart
| Material | Max Rated Depth | Hydrostatic Resistance | Seawater Resistance | Optical Performance | Cost Level | Recommended Use Case |
|---|---|---|---|---|---|---|
| C-axis Sapphire | 7000m+ | Outstanding | Outstanding | High hardness, scratch resistant, stable transmission | High | Primary for 7000m flanged subsea dome, long-term deep immersion |
| JGS1 Fused Silica | 3000m+, 7000m with reinforced wall & FEA | Excellent | Excellent | High transmittance, low birefringence | Medium | Default choice for 3000m flanged dome, 7000m alternative option |
| BK7 Optical Glass | ≤3000m (strict annealing) | Good | Good | Good visible band transmission | Low | Cost-sensitive 3000m projects, not for long-term deep use |
| Acrylic (PMMA) | <500m | Poor, creep risk | Fair | Good light transmission | Very Low | NOT acceptable for 3000m /7000m deep sea service |
Note: Flange dimension, bolt hole layout and O-ring groove can be fully customized to match your housing design.
Integrated Flange Design Advantage
Traditional separate dome + retainer ring may bring leakage risk under cyclic deep-sea pressure. Our one-piece flanged dome is machined from single optical blank. The flange and dome form a monolithic part:
- Built-in O-ring sealing step for direct watertight assembly
- Custom bolt hole pattern according to your drawing
- Reduce parts count, simplify your mechanical assembly
- Stress distribution optimized for high hydrostatic pressure
Customization Options
- Custom dome OD, ID, wall thickness
- Custom flange diameter, bolt hole positions, O-ring groove size
- AR coating for target wavelength band (VIS / NIR)
- 3000m or 7000m pressure rating selection
- Surface tolerance adjustment to match your housing sealing requirement
FEA Simulation & Pressure Validation
For all flanged dome orders, especially 7000m version, finite element analysis will be performed before machining to check stress concentration on flange root. After optical polishing, hydrostatic pressure testing can be arranged and official test document provided.
MOQ & Lead Time
No ready stock. MOQ 5 pcs. Single piece sample available with sample pricing. Lead time: 3–5 weeks for 3000m flanged dome; 4–6 weeks for 7000m flanged dome including FEA simulation, optical fabrication and pressure validation.
How To Order
Send your mechanical drawing with flange dimension, bolt layout and O-ring requirements. Specify working depth, material and coating needs. Our optical engineer will provide DFM feedback and formal quotation within 24 working hours. Not sure what to include? Check our custom optics RFQ checklist.
Submit Your Flanged Dome Drawing
Frequently Asked Questions
Q: What is the advantage of flanged dome vs standard dome?
A: One-piece dome + flange, direct bolt-on installation, no retainer ring needed. Fewer sealing interfaces and lower leakage risk.
Q: Can flanged dome be rated for 3000m and 7000m?
A: Yes, we manufacture flanged domes for both depth ratings. FEA is mandatory for 7000m flanged version.
Q: Material options for integrated flanged dome?
A: JGS1 fused silica for 3000m; C-axis sapphire for 7000m.
Q: Can I customize flange bolt pattern and dimensions?
A: Yes, flange geometry, bolt circle and O-ring step fully custom to your housing drawing.
Q: MOQ and lead time for flanged dome?
A: 1pc prototype available, mass MOQ 5pcs. 3–5 weeks for 3000m; 4–6 weeks for 7000m.
Q: AR coating and hydrostatic test available?
A: Yes, both AR coating and hydrostatic pressure test can be added as optional services.
Related FAQs for Flanged Subsea Dome
Standard vs Integrated Flanged Dome Port | Subsea Dome Comparison
Optical Dome Diameter Tolerance & Surface Specs | Subsea Dome
Related Technical Articles
Integrated Flanged Optical Dome Port: Reduce Subsea Leakage Risk
3000m vs 7000m Subsea Dome Comparison
Explore More Felix Glass Resources
• Learn about our China custom optical dome manufacturing facility
• Read our N-BK7 optical glass material introduction
• See our PTZ surveillance optical dome case study
• Prepare your RFQ with our custom optics RFQ checklist
Need Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.








