Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888

IR Optical Dome for UAV Gimbal Thermal Imaging Pod Case Study

Update Time:2026/11/6 15:57:10
IR Optical Dome for UAV Gimbal Thermal Imaging Pod Case Study
IR Optical Dome for UAV Gimbal Thermal Imaging Pod Case Study

Case Study

IR Optical Dome for UAV Gimbal Thermal Imaging Pod

DLC-coated multispectral ZnS dome enables 8–14μm thermal imaging on lightweight drone EO/IR gimbal systems

Customer Background

A North American drone gimbal manufacturer needed a custom IR dome for their next-generation 3-axis stabilized EO/IR pod. The pod integrates a visible-light camera and a 640×512 LWIR thermal camera into a single gimbal, used for industrial inspection, search-and-rescue, and public safety operations.

Previous dome supplier could not meet their weight target and environmental durability requirements, causing vibration blur during high-speed flight and micro-cracks after 50 flight hours.

Technical Challenges

Ultra-Lightweight Requirement

Dome weight must be minimized to preserve gimbal payload capacity and flight time — target wall thickness < 3mm.

Bird Strike & Rain Erosion

Dome must withstand high-speed rain erosion and bird impact during flight without optical distortion.

Dual-Band Optical Performance

Visible camera + LWIR 8–14μm thermal camera must both see through the same dome — no visible band absorption.

Aerospace Environmental Spec

-40°C to +70°C operating, altitude 4000m, humidity, vibration and thermal shock per aerospace standards.

Material Selection Process

We evaluated three IR materials against the gimbal's requirements:

Material Weight (density) Rain Erosion Resistance Dual-Band (Vis+LWIR) Selected?
Multispectral ZnS + DLC 4.09 g/cm³ (medium) Excellent (DLC coated) ✓ Transmits visible + IR ✓ SELECTED
CVD ZnSe 5.27 g/cm³ (heavy) Poor (soft surface) ✗ Opaque to visible ✗ Too heavy, no visible
Germanium 5.33 g/cm³ (heaviest) Poor (brittle) ✗ Opaque to visible ✗ Too heavy + temp limit

We recommended multispectral CVD ZnS with DLC (diamond-like carbon) coating — the only material that transmits both visible and LWIR bands, survives rain erosion, and stays within the weight budget. Learn more in our ZnS material guide and Germanium material comparison.

Our Solution

  • Material: Multispectral CVD ZnS, double-side polished
  • Geometry: Hemispherical dome, OD 63mm, wall thickness 2.8mm (weight-optimized)
  • Coating: DLC (diamond-like carbon) outer surface + broadband AR inner surface
  • Optical Performance: >75% transmission across 0.4–12μm (visible + LWIR dual-band)
  • Mounting: Precision flange ground to customer's gimbal housing, anti-reflection black edge paint
  • Surface Quality: 40/20 scratch-dig, wavefront error λ/4 at 633nm

Test Results & Field Performance

-35%
Weight Reduction vs Previous Dome
200+ hrs
Flight Test Hours Completed
0 cracks
Rain Erosion & Vibration Tests

Customer reported stable thermal imaging with no vibration blur, clear visible camera view, and zero dome defects after 200+ flight hours across desert, coastal and high-altitude environments. They have since qualified our ZnS dome for their production gimbal line with annual volume of 2,000+ units.

Related Resources

  • Industry Solutions
  • Customer Success Stories
Industrial Automation Touch Cover Glass
Industrial Automation

Provide a stable human-computer interaction experience for long-term operating equipment.

Medical Display Optical Glass
Medical Equipment

Supports gloved operation, high stability and long-term validation.

Payment Terminal Touch Glass
Payment Terminals

High cost-performance ratio, fast import.

Outdoor Display Cover Glass
Outdoor

Sunlight-visible, waterproof, and resistant to violent damage.

Farm & Construction Vehicle Touch Glass
Farm Machinery & Construction Vehicles

Vibration resistant, dustproof, waterproof, all-weather operation.

Intercom System Display Glass
Intercoms System

Anti-interference, anti-glare.

Maritime & Aerospace Optical Glass
Maritime & Aerospace

Stable Interaction in Complex Environments.

Optical Glass & Professional Touch Panel Glass Processing

After a full range of optical glass products, we also provide professional deep processing for touch screen panel glass.
[Automotive Tempered Glass Solutions Provider]

[Automotive Tempered Glass Solutions Provider]

Felix Glass As a certified IATF 16949:2016 manufacturer, High-Impact Tempered Glass for New Energy Vehicle Dashboards - HD, Anti-Scratch, UV Protection, we deliver precision-engineered tempered glass solutions for next-gen EV dashboards,central control screens, and in-vehicle systems. Our certification-driven approach ensures compliance with automotive OEM standards.

[Medical Grade Tempered Glass Cover Solution]
[Medical Grade Tempered Glass Cover Solution]

[Medical Grade Tempered Glass Cover Solution]

As a leading custom tempered glass cover manufacturer, FELIX GLASS provides custom tempered glass covers for LCD screen protection, as well as FDA/CE certified custom tempered glass for portable ultrasound systems, which are ultra-thin, drop-proof, and disinfection-resistant. We specialize in providing precision engineering solutions that meet the stringent requirements of the global medical industry. Our products excel in critical medical environments with the following key advantages

Solar Control System Glass Panel
[Solar Control System Glass Panel]

[Solar Equipment Screen Glass Solutions]

As a leading global manufacturer of custom tempered glass panels, we focus on providing customized high-performance solutions for key applications such as solar photovoltaic controllers, household solar systems, energy storage devices, portable mobile power supplies and photovoltaic energy storage systems. Our tempered glass panels use cutting-edge technology and meet strict safety standards to protect LCD screens in these harsh environments.

[​Charging Station Customized Glass Solutions]
[​Charging Station Customized Glass Solutions]

[​Charging Station Customized Glass Solutions]

As an IATF 16949 certified automotive grade tempered glass manufacturer, we focus on providing high-performance solutions for electric vehicle charging station displays, combining advanced engineering technology with strict quality control. Our glass panels are carefully designed to meet the rigorous requirements of outdoor environments, ensuring durability, safety and user-friendly operation experience.

[Smart Switch Glass Panel Solution]
[Smart Switch Glass Panel Solution]

[Smart Switch Glass Panel Solution]

[Smart Switch Glass Panel Solution]
9H Scratch Resistant Tempered Glass Panel for 86mm Smart Touch Light Switch - Aluminosilicate Glass with 3M VHB Tape
 Invisible Protection, Superior Control For smart switch manufacturers and system integrators designing high-end home automation, hotel controls and commercial panels,Our carefully crafted glass panels last 3x longer than standard panels (proven over 500,000 touches).

[Customized Glass Manufacturing Solutions]
[Customized Glass Manufacturing Solutions]

[Customized Glass Manufacturing Solutions]

We have advanced glass manufacturing facilities: CNC/laser cutting and edge polishing, precision CNC machining, glass laser cutting, fully automatic hot bending machine and flip polishing equipment, precision milling countersunk holes and blind holes, precision edge molding, multi-level step surface processing, complex curved glass molding, to meet the strict design requirements of customized glass panel applications from consumer electronics to medical/industrial fields.

James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News