Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888
Home / All / Custom Display &Functional Glass / Custom ITO Conductive Glass Manufacturer / Custom ITO Glass Electrodes | Lab Working Electrode Slides - Felix Glass

Custom ITO Glass Electrodes | Lab Working Electrode Slides - Felix Glass

Custom ITO Glass Electrodes | Lab Working Electrode Slides - Felix Glass
Custom ITO Glass Electrodes | Lab Working Electrode Slides - Felix GlassCustom ITO Glass Electrodes | Lab Working Electrode Slides - Felix GlassCustom ITO Glass Electrodes | Lab Working Electrode Slides - Felix GlassCustom ITO Glass Electrodes | Lab Working Electrode Slides - Felix GlassCustom ITO Glass Electrodes | Lab Working Electrode Slides - Felix Glass
Share
CategoriesCustom ITO Conductive Glass Manufacturer
BrandFELIX GLASS optical glass Manufacturing base
Product SpecificationsITO-E01 1
SubstrateBorosilicate glass / Fused silica (quartz) optional
ITO LayerIn₂O₃:SnO₂, thickness 100–200 nm
Sheet Resistance5 Ω/sq, 10 Ω/sq, 15 Ω/sq, 20 Ω/sq (custom)
Visible Transmittance≥85% @ 550 nm
Size (Standard)20×20 mm, 25×75 mm (microscope slide), 50×50 mm
Thickness0.5 mm, 1.1 mm, 1.5 mm
Surface Roughness≤3 nm RMS
Working Temp≤250°C
Chemical StabilityResists dilute acid/alkali/organic solvents; ethanol/acetone cleanable
Custom ProcessCutting, drilling, patterning, etching, edge chamfering
Unit PriceUS $ 2.88-6.26 / piece
FOB portSHENGZHEN SHANGHAI GUANGZHOU
Terms of PaymentL/C, D/A, D/P, Western Union
DownloadDownload pdfDownload pdfDownload pdfDownload pdfDownload pdf
Detail Information
Custom ITO Glass Electrodes

Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.

Request a Quote

Lab Grade
ITO Working Electrode
5 Ω/sq
≥85% Transmittance
Custom Patterning
Small Batch OK

ITO Glass Electrodes
for Lab Electrochemistry & Research

Electrochemistry-grade ITO glass slides — transparent working electrodes for cyclic voltammetry, spectroelectrochemistry, photoelectrochemical cells and biosensor research. Magnetron-sputtered ITO on borosilicate or fused silica, with custom cutting, drilling and electrode patterning for academic and industrial labs.

  • Sheet Resistance 5 / 10 / 15 / 20 Ω/sq (Custom)
  • Visible Transmittance ≥ 85% @ 550 nm
  • Standard Sizes 20×20 mm, 25×75 mm, 50×50 mm
  • Borosilicate or Fused Silica Substrate
  • ITO Patterning / Etching for Electrode Arrays
  • Chemical Stable in Electrolyte & Organic Solvents
  • Small Batch & Lab Prototype Orders Welcome
Engineering Commitment: Send your cell dimension, target sheet resistance, substrate (borosilicate or quartz) and patterning layout. Our engineers will review your electrochemistry setup and recommend a matched ITO slide configuration.
ITO glass slide electrodes for lab electrochemistry

Why Do Electrochemistry Labs Switch From Cheap ITO Slides?

Pain Points With Generic ITO Slides Felix Glass Solution
Sheet resistance drifts batch to batch, CV curves shift between runs Our in-house magnetron sputtering workshop controls ITO thickness and sheet resistance batch-to-batch, with four-point-probe test on every lot for consistent electrochemical signals.
Background current is high, noisy baseline ruins low-concentration sensing We control substrate flatness (≤3 nm RMS roughness) and ITO film cleanliness, keeping background current low enough for sensitive biosensor and trace analysis.
Standard size cannot fit your custom spectroelectrochemistry cell We custom-cut ITO slides to your cell window dimension, with optional drilling, notching and edge chamfer, not a generic off-the-shelf microscope slide.
ITO film peels or discolors after solvent cleaning or electrolyte contact Optimized sputtering process and post-coating annealing keep ITO film stable in dilute acid, alkali and common organic solvents (ethanol, acetone, methanol).
No UV transmission, deep-UV spectroelectrochemistry blocked We offer fused silica (quartz) ITO slides for UV-Vis-NIR 185–3500 nm range, when borosilicate cuts off below 320 nm.
Supplier enforces high MOQ, hard for academic lab orders We support small-batch and prototype orders for university and industrial R&D labs, with fast sampling and global shipping.
Hard to find supplier who can do custom electrode patterning and etching We provide ITO patterning, etching and electrode array services in-house, matching your microfluidic or sensor chip layout.

Why Academic & Industrial Labs Work With Felix Glass

19+ Years

Optical Glass Processing Experience

5-20 Ω/sq

Standard ITO Resistance Grade

≥85%

Visible Transmittance @ 550 nm

≤3 nm

Surface Roughness RMS

Small Batch

Sample & Prototype Orders Welcome

Global Ship

Fast Delivery to Research Labs

*Actual resistance, size and lead time depend on substrate, patterning and quantity.

One supplier from substrate cutting to ITO sputtering and electrode patterning. We control borosilicate / fused silica cutting, magnetron ITO coating, four-point-probe testing and ultrasonic cleaning, so your electrochemistry experiments get consistent, low-noise transparent working electrodes batch after batch.

ITO Glass Slides Engineered for Your Experiment

Three-Electrode Cell Working Electrode

Standard ITO slide as transparent working electrode in 3-electrode cells for cyclic voltammetry (CV), chronoamperometry and impedance testing.

  • 10-20 Ω/sq standard grade for general CV
  • Low background current for stable baseline
  • 20×20 mm, 25×75 mm standard sizes
  • Custom cut to fit your cell window

Recommended Solution: Borosilicate Substrate + 10-20 Ω/sq ITO + Edge Chamfer

Discuss Your CV Setup →

Spectroelectrochemistry & In-Situ Optics

High-transmittance ITO slide for spectroelectrochemical cells, combining electrochemical control with in-situ UV-Vis optical monitoring.

  • ≥85% visible transmittance for clean spectra
  • Quartz substrate for UV range down to 185 nm
  • Optical-grade polished surface
  • Thickness matched to your spectrophotometer

Recommended Solution: Fused Silica Substrate + ITO Coating + Optical Polish

Discuss Your Spectro Cell →

Photoelectrochemistry & Biosensors

Custom-patterned ITO slide for photoelectrochemical cells, photocatalysis, biosensors, electrochromic devices and microfluidic chips.

  • Custom ITO etching for electrode arrays
  • Quartz substrate for photocatalysis UV transmission
  • Low roughness for uniform surface modification
  • Drilled / notched contact pads

Recommended Solution: Borosilicate or Quartz + Patterned ITO + Drilled Contact Pads

Discuss Your Sensor Chip →

Not Sure ITO or FTO?

Choosing between ITO and FTO depends on pH range, temperature and optical requirement. We supply both, and our engineers can help you select.

  • ITO: lower resistance, better for CV and biosensors
  • FTO: wider pH and high-temperature stability
  • Both available in borosilicate and quartz
  • Send your electrolyte pH and temperature range

Recommended Solution: Tell Us Your Electrolyte & Temperature, We Recommend ITO or FTO

Ask Which Conductive Glass Fits Your Experiment →

Core Technical Specifications

ItemParameter
SubstrateBorosilicate glass / Fused silica (quartz) optional
ITO LayerIn₂O₃:SnO₂, thickness 100-200 nm, magnetron sputtered
Sheet Resistance5 / 10 / 15 / 20 Ω/sq, custom target on request
Visible Transmittance≥ 85% @ 550 nm (standard grade)
Standard Size20×20 mm, 25×75 mm (microscope slide), 50×50 mm
Thickness0.5 mm, 1.1 mm, 1.5 mm, custom on request
Surface Roughness≤ 3 nm RMS
Working Temperature≤ 250°C continuous
Chemical StabilityResists dilute acid / alkali / organic solvents; ethanol, acetone cleanable
Custom ProcessCutting, drilling, patterning, etching, edge chamfering

*Subject to substrate, resistance grade, patterning and quantity.

Typical ITO Electrode Project Examples

University CV Lab ITO Slide Order

Customer Requirement

Custom 25×75 mm borosilicate ITO slides at 15 Ω/sq for undergraduate cyclic voltammetry teaching lab, low noise baseline, consistent across a class set.

Our Solution

Borosilicate substrate precision cutting, magnetron sputtered ITO (target 15 Ω/sq), four-point-probe resistance test per slide, ultrasonic clean and individual packaging.

Typical Project Outcome

Sample batch delivered in 5 days, approved by the teaching lab, reordered each semester for class experiments.

Industrial Biosensor Patterned ITO Project

Customer Requirement

Custom-patterned ITO on quartz substrate for a medical biosensor chip, electrode array layout per customer drawing, drilled contact pads, UV transmission for optical readout.

Our Solution

Quartz substrate cutting and polishing, ITO sputtering, custom photolithography patterning per drawing, drilled contact pads, batch resistance and optical inspection.

Typical Project Outcome

Prototype chips delivered on schedule, validated under customer's biosensor assembly, approved for follow-up pilot production.

From Cell Drawing to Finished ITO Slide

01 Drawing Review

Verify slide dimension, thickness, target sheet resistance, substrate and patterning layout to formulate production plan.

02 Material Selection

Select borosilicate for general electrochemistry or fused silica for UV / photoelectrochemistry.

03 Precision Cutting

Substrate cutting to standard 20×20, 25×75, 50×50 mm or custom size per drawing.

04 Drilling & Edge

CNC drilling of contact pads, notching and edge chamfering to fit your cell.

05 Polishing & Cleaning

Optical surface polishing for low roughness, strict ultrasonic cleaning before coating.

06 ITO Sputtering

Magnetron sputtering to achieve target 5-20 Ω/sq, with post-coating annealing for film stability.

07 Patterning (If Needed)

Custom ITO etching and electrode array patterning per your sensor or chip layout.

08 QC & Packaging

Four-point-probe resistance test, transmittance test, roughness check and individual clean packaging.

Why Start With a Small ITO Slide Sample?

01 Verify Cell Fit

Confirm slide dimension, thickness and contact pad position fit your electrochemistry cell before bulk order.

02 Test Electrochemical Performance

Evaluate sheet resistance, baseline noise and transmittance under your real electrolyte and optical setup.

03 Reduce Research Risk

Validate substrate, resistance and patterning with a small sample batch before committing to production quantity.

Not Sure Which ITO Slide Configuration You Need?

Your RequirementRecommended Solution
General CV, chronoamperometry, teaching labBorosilicate ITO, 10-20 Ω/sq, 25×75 mm
High-current experiment, low sheet resistance neededBorosilicate ITO, 5 Ω/sq grade
UV spectroelectrochemistry, photocatalysis below 320 nmFused Silica Quartz ITO, UV-Vis-NIR 185-3500 nm
Biosensor, microfluidic chip, electrode arrayPatterned ITO with custom etching and drilled contact pads
pH extreme, high-temperature electrolyteConsider FTO conductive glass instead of ITO
Custom cell window, non-standard sizeCNC cut to your drawing, with edge chamfer
Academic R&D, small quantity prototypeSmall-batch sample order, fast sampling

Still confused about substrate or resistance grade? Ask Our Engineers for Free Guidance

Frequently Asked Questions

Q: What is ITO glass used for in electrochemistry?
A: ITO glass serves as a transparent conductive working electrode for cyclic voltammetry (CV), chronoamperometry, spectroelectrochemistry, photoelectrochemical cells, biosensors and microfluidic chips. Its combination of conductivity and optical transparency lets you run electrochemistry while observing the cell optically.
Q: Which sheet resistance should I choose?
A: For general CV and sensing experiments, 10-20 Ω/sq is the standard grade. For higher-current experiments or lower-voltage drive, we recommend 5 Ω/sq. For touch or high-resistance applications, higher grades are available on request.
Q: Can I clean ITO slides with ethanol or acetone?
A: Yes. Our ITO film is stable in common organic solvents (ethanol, acetone, methanol) and dilute aqueous electrolytes. We recommend ultrasonic clean in ethanol followed by nitrogen dry before use.
Q: What standard sizes do you stock?
A: Standard sizes are 20×20 mm, 25×75 mm (standard microscope slide format) and 50×50 mm, with 0.5, 1.1 and 1.5 mm thickness. Custom cut-to-size is available per your drawing.
Q: Should I choose borosilicate or quartz substrate?
A: Borosilicate is the cost-effective choice for general electrochemistry and visible-range experiments. Fused silica quartz is required for UV spectroelectrochemistry, photocatalysis or any work below 320 nm, because borosilicate cuts off UV transmission.
Q: Do you offer patterned ITO / electrode arrays?
A: Yes. We provide custom ITO etching and patterning for electrode arrays, contact pads and microfluidic chip layouts. Send your drawing or mask design and we will quote the patterning process.
Q: When should I choose FTO instead of ITO?
A: ITO is preferred for lower resistance and better visible transparency. FTO is more stable at extreme pH (strong acid or strong base) and higher temperature. If your electrolyte is outside pH 4-10 or above 250°C, FTO is usually the better choice. We supply both.
Q: What is the minimum order quantity for academic labs?
A: We support small-batch and prototype orders for university and industrial R&D labs. Standard slides are available in small quantities; custom patterned slides depend on process complexity.
Q: How do you test each batch?
A: Every batch passes four-point-probe sheet-resistance test, visible transmittance check, surface roughness inspection and visual defect inspection. Batch data is available on request for your lab records.
Q: What information do you need for a quote?
A: Substrate (borosilicate or quartz), dimension and thickness, target sheet resistance, whether you need patterning (with drawing), application (CV / spectro / biosensor / photoelectrochem) and quantity. Incomplete specs are acceptable for preliminary evaluation.

Request Custom ITO Glass Slides for Your Lab

Tell us your cell setup and resistance target. Our engineers will recommend a matched ITO slide configuration and quote fast.

Before You Send Your Inquiry, Prepare These Inputs

  • Application: CV / chronoamperometry, spectroelectrochemistry, photoelectrochemistry, biosensor, microfluidic, or other
  • Substrate: borosilicate (general) / fused silica quartz (UV)
  • Size & thickness: 20×20, 25×75, 50×50 mm, or custom dimension
  • Sheet resistance target: e.g. 5 / 10 / 15 / 20 Ω/sq
  • Patterning: none, or custom electrode array drawing / mask
  • Electrolyte & temperature: pH range, working temperature (helps us recommend ITO vs FTO)
  • Quantity: small lab batch, prototype, or ongoing bulk supply

Free engineering review · small-batch sample support · 19+ years optical glass manufacturing

Explore More ITO Research Resources

Have an Electrochemistry ITO Slide Project? Let's Review It.

Send your cell dimension, resistance target or patterning drawing. You don't need to finalize every spec. Our engineers will recommend the right substrate and ITO grade for your experiment.

Free engineering review · small-batch sample support · OEM/ODM manufacturing

Need Custom Optical Glass Solution?

Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.

Get Free RFQ

Custom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.

We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address
James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News