Provide a stable human-computer interaction experience for long-term operating equipment.
IR Window for Automotive Night Vision Thermal Camera Case Study

DLC-coated germanium window for automotive thermal night vision systems — road safety sensing in total darkness A German automotive Tier-1 supplier needed a custom IR window for their next-generation automotive thermal night vision camera. The camera is integrated into the front grille of premium passenger vehicles and commercial trucks, detecting pedestrians, animals and vehicles beyond headlight range in total darkness. Previous window supplier struggled to meet automotive-grade reliability requirements — windows developed micro-cracks after thermal cycling vibration testing, and DLC coating peeled off after road salt exposure. -40°C to +85°C operating, under-hood heat soak, rapid thermal cycling from winter to summer conditions. Front grille exposed to road salt, washer fluid, bird droppings, insect impacts — coating must not peel or haze. Road vibration, stone chip impact, car wash brushes — window must survive 10-year vehicle service life. Automotive production requires millions of units per year — cost per window must be competitive at scale. We evaluated three IR materials against automotive night vision requirements: We recommended single-crystal germanium with DLC protective coating — the high refractive index (~4.0) enables a thinner, lighter window design that meets cost targets at automotive volumes. Learn more in our Germanium material guide. Customer validated our germanium windows through 3 years of automotive qualification testing, including thermal cycling, vibration, road salt spray, stone chip and car wash abrasion. The DLC coating showed no peeling, hazing or transmission loss after the full test cycle. Our window is now in series production for their premium vehicle program at 500,000+ units per year. Need automotive-grade IR windows for your night vision camera? Send us your drawing →IR Window for Automotive Night Vision Thermal Camera
Customer Background
Technical Challenges
Automotive Temp Range
Road Salt & Chemical Resistance
Vibration & Impact
High-Volume Cost Target
Material Selection Process
Material
8–14μm Transmission
DLC Available
Cost at Volume
Selected?
Germanium + DLC
Excellent (high index)
✓ DLC proven
Medium (process optimized)
✓ SELECTED
Multispectral ZnS + DLC
Good (lower index)
✓ DLC available
High (larger blank needed)
✗ Oversized optics, costly
CVD ZnSe
Good
✗ Not practical
Very High
✗ Too expensive for auto
Our Solution
Test Results & Production Status
Related Resources
- Industry Solutions
- Customer Success Stories
- Update TimeOct 14,2026
Felix Glass supplies high-quality fused silica laser protective windows for fiber laser cutting equipment. Low absorption and high laser damage threshold protect laser head effectively. - Update TimeOct 13,2026
Felix Glass manufactured custom AR+AF tempered cover glass for outdoor industrial HMI touch terminals. Combined anti-reflection and anti-fingerprint coating improves screen readability under strong sunlight and simplifies daily cleaning.
Supports gloved operation, high stability and long-term validation.
High cost-performance ratio, fast import.
Sunlight-visible, waterproof, and resistant to violent damage.
Vibration resistant, dustproof, waterproof, all-weather operation.
Anti-interference, anti-glare.
Stable Interaction in Complex Environments.
Optical Glass & Professional Touch Panel Glass Processing
After a full range of optical glass products, we also provide professional deep processing for touch screen panel glass.![[Automotive Tempered Glass Solutions Provider]](https://icdn.tradew.com/file/202410/1576316/jpg/8343425.jpg)

[Automotive Tempered Glass Solutions Provider]
Felix Glass As a certified IATF 16949:2016 manufacturer, High-Impact Tempered Glass for New Energy Vehicle Dashboards - HD, Anti-Scratch, UV Protection, we deliver precision-engineered tempered glass solutions for next-gen EV dashboards,central control screens, and in-vehicle systems. Our certification-driven approach ensures compliance with automotive OEM standards.
![[Medical Grade Tempered Glass Cover Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8343437.jpg)
![[Medical Grade Tempered Glass Cover Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8209139.jpg)
[Medical Grade Tempered Glass Cover Solution]
As a leading custom tempered glass cover manufacturer, FELIX GLASS provides custom tempered glass covers for LCD screen protection, as well as FDA/CE certified custom tempered glass for portable ultrasound systems, which are ultra-thin, drop-proof, and disinfection-resistant. We specialize in providing precision engineering solutions that meet the stringent requirements of the global medical industry. Our products excel in critical medical environments with the following key advantages

![[Solar Control System Glass Panel]](https://icdn.tradew.com/file/202410/1576316/jpg/8209140.jpg)
[Solar Equipment Screen Glass Solutions]
As a leading global manufacturer of custom tempered glass panels, we focus on providing customized high-performance solutions for key applications such as solar photovoltaic controllers, household solar systems, energy storage devices, portable mobile power supplies and photovoltaic energy storage systems. Our tempered glass panels use cutting-edge technology and meet strict safety standards to protect LCD screens in these harsh environments.
![[Charging Station Customized Glass Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8343446.jpg)
![[Charging Station Customized Glass Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8209141.jpg)
[Charging Station Customized Glass Solutions]
As an IATF 16949 certified automotive grade tempered glass manufacturer, we focus on providing high-performance solutions for electric vehicle charging station displays, combining advanced engineering technology with strict quality control. Our glass panels are carefully designed to meet the rigorous requirements of outdoor environments, ensuring durability, safety and user-friendly operation experience.
![[Smart Switch Glass Panel Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8343745.jpg)
![[Smart Switch Glass Panel Solution]](https://icdn.tradew.com/file/202410/1576316/jpg/8209142.jpg)
[Smart Switch Glass Panel Solution]
[Smart Switch Glass Panel Solution]
9H Scratch Resistant Tempered Glass Panel for 86mm Smart Touch Light Switch - Aluminosilicate Glass with 3M VHB Tape
Invisible Protection, Superior Control For smart switch manufacturers and system integrators designing high-end home automation, hotel controls and commercial panels,Our carefully crafted glass panels last 3x longer than standard panels (proven over 500,000 touches).
![[Customized Glass Manufacturing Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8343744.jpg)
![[Customized Glass Manufacturing Solutions]](https://icdn.tradew.com/file/202410/1576316/jpg/8209143.jpg)
[Customized Glass Manufacturing Solutions]
We have advanced glass manufacturing facilities: CNC/laser cutting and edge polishing, precision CNC machining, glass laser cutting, fully automatic hot bending machine and flip polishing equipment, precision milling countersunk holes and blind holes, precision edge molding, multi-level step surface processing, complex curved glass molding, to meet the strict design requirements of customized glass panel applications from consumer electronics to medical/industrial fields.

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.









