Custom ITO Conductive Glass Dome | Heated CCTV Cover - Felix Glass






Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
Custom ITO Conductive Glass Dome
for CCTV, Underwater and Anti-Fog Optics
Custom curved ITO conductive glass dome engineered for security CCTV housings, underwater ROV cameras, smart touch panels and industrial optical instruments. Magnetron-sputtered ITO heating coating delivers anti-frost performance down to -40°C, while tempered glass body supports IP68 deep-water pressure and marine salt-spray environments.
- Custom Diameter 5 mm to 180 mm, Custom Curvature
- ITO Sheet Resistance 5-1000 Ω/sq, Customer-Specified
- Visible-Light Transmittance ≥ 85%
- Anti-Fog / Anti-Frost Performance Down to -40°C
- Tempered Glass Body, 8 Mohs Surface Hardness
- IP68 / IP69K Deep-Water Pressure Support
- Optional AR / AF / Anti-Scratch / IR-Cut Coating
Is Your Current ITO Dome Supplier Causing These Problems?
| Pain Points With Other Suppliers | Felix Glass Solution |
|---|---|
| Dome fogs or frosts in cold / outdoor / humid environment, camera view blocked | Magnetron-sputtered ITO conductive heating coating on the curved surface delivers uniform anti-fog and anti-frost performance down to -40°C, keeping CCTV and underwater camera optics clear in all weather. |
| Dome cracks or breaks under deep-water pressure or marine environment | We use tempered soda-lime or borosilicate dome bodies (8 Mohs hardness), tested for IP68 deep-water pressure and 48-hour marine salt spray, reducing field failure and maintenance cost. |
| Standard off-the-shelf dome cannot match your housing flange and curvature | We manufacture curved ITO domes strictly according to your housing drawing, diameter, radius of curvature, flange dimension and edge finish — not a generic off-the-shelf product. |
| ITO resistance is unstable, heating current drifts batch to batch | In-house magnetron sputtering workshop controls ITO sheet-resistance batch consistency (5-1000 Ω/sq) and tests every dome before shipment. |
| ITO coating peels or hazed after salt spray or UV exposure | We optimize sputtering process, edge insulation and optional over-coating (AR / AF / anti-scratch / IR-cut) to keep ITO film stable under 48h marine salt spray and continuous outdoor UV. |
| Supplier requires high MOQ, hard for camera prototype and small-batch orders | We support 5-piece sample orders for CCTV prototype validation, with 3-5 day sample lead time, before committing to mass production. |
| Hard to find supplier who can do curved ITO, not just flat ITO glass | Our factory has dedicated curved-glass forming and curved-surface ITO sputtering capability, supporting both hemispherical and custom-radius domes. |
Why Global CCTV & Camera OEM Buyers Work With Felix Glass
Optical Glass Processing Experience
Dome Diameter Range
Sample MOQ
Typical Sample Lead Time
Typical Bulk Lead Time
Deep-Water Pressure Rated
*Actual lead time depends on dome diameter, curvature, ITO resistance, coating and quantity.
One supplier from curved-glass forming to ITO sputtering and QC. We integrate dome annealing, tempering, curved-surface ITO coating, busbar patterning and final optical inspection, so your CCTV or underwater camera housing gets a matched conductive dome without multi-supplier coordination.
ITO Glass Dome Engineered for Your Camera Application
Security CCTV Dome
ITO conductive heating dome for outdoor PTZ / bullet CCTV housings, preventing fog and frost in cold, humid or coastal surveillance environments.
- Anti-fog / anti-frost down to -40°C
- Tempered glass body, IP66 / IP67 rated
- Optional AR coating for sharp camera image
- Custom flange to match your housing
Recommended Solution: Tempered Soda-Lime Dome + Heater-Grade ITO + Edge Busbar + Optional AR
Discuss Your CCTV Dome Requirement →Underwater ROV Camera Dome
Curved ITO glass dome for underwater ROV, subsea inspection cameras and deep-sea exploration optics, pressure-rated and salt-spray resistant.
- IP68 deep-water pressure support
- 48h marine salt spray test passed
- Anti-fog in cold subsea transition
- Borosilicate or fused silica substrate
Recommended Solution: Borosilicate Dome + ITO Coating + Pressure-Rated Edge Seal + Optional IR-Cut
Discuss Your Underwater Dome Project →Smart Touch & Curved Sensor
Curved ITO conductive glass for smart home touch panels, automotive interior surfaces and industrial instrument curved windows.
- Uniform sheet resistance for touch sensing
- Curved forming to match product ID
- Optional AF anti-fingerprint coating
- High visible transmittance ≥85%
Recommended Solution: Tempered Glass Dome + ITO Sputtering + AF Over-Coating + Edge Grinding
Request Touch-Grade Curved ITO →Industrial Anti-Fog Optics
Flat or curved ITO heater glass for industrial instruments, vehicle mirrors, outdoor displays and laser viewports where condensation blocks the view.
- Fast anti-fog and de-icing response
- DC 12V / 24V drive compatible
- Long-edge or short-edge busbar
- Large format custom cut available
Recommended Solution: Soda-Lime / Borosilicate + Heater-Grade ITO + Insulated Edge
Discuss Your Anti-Fog Optics Project →Core Technical Specifications
| Item | Parameter |
|---|---|
| Dome Diameter | 5 mm to 180 mm, custom larger size on request |
| Curvature | Hemispherical or custom radius, per housing drawing |
| Base Material | Soda-lime / Borosilicate / Fused Silica Quartz |
| Hardness | Tempered glass body, 8 Mohs surface hardness |
| ITO Sheet Resistance | 5-1000 Ω/sq, customer-specified target* |
| Visible Transmittance | ≥ 85% (standard ITO grade, higher with AR over-coating) |
| Heating Performance | Anti-fog / anti-frost down to -40°C* |
| Environment Rating | IP66 / IP67 / IP68, 48h marine salt spray |
| Working Temperature | -40°C to +85°C continuous |
| Optional Coating | AR / AF / anti-scratch / IR-cut over-coating |
| Sample MOQ | 5 pieces |
| Sample Lead Time | 3-5 days* |
| Bulk Lead Time | 12-20 days* |
*Subject to dome diameter, curvature, ITO resistance, coating and quantity.
Typical ITO Dome Project Examples
Outdoor PTZ CCTV Heated Dome Project
Customer Requirement
Custom ITO heated glass dome for a Nordic outdoor PTZ CCTV housing, anti-frost down to -30°C, tempered body, matching flange dimension, AR coating for night vision clarity.
Our Solution
Tempered soda-lime dome forming per drawing, curved-surface ITO sputtering (target 30 Ω/sq), edge busbar with insulated border, AR over-coating, salt-spray and temperature-cycle testing before shipment.
Typical Project Outcome
Sample domes delivered in 5 days, approved by the camera OEM for pilot production, field-tested through one winter without frost-related image loss.
Underwater ROV Camera ITO Dome Project
Customer Requirement
Custom borosilicate ITO dome for a subsea inspection ROV, IP68 pressure rating, 48h marine salt spray, anti-fog during cold-to-warm surface transition, IR-cut over-coating.
Our Solution
Borosilicate dome annealing and pressure testing, curved ITO sputtering, IR-cut over-coating, pressure and salt-spray QC batch-by-batch.
Typical Project Outcome
Custom domes delivered on schedule, validated under customer ROV pressure chamber working conditions, approved for follow-up production batch.
From Housing Drawing to Finished ITO Dome
01 Engineering Drawing Review
Verify dome diameter, radius of curvature, flange dimension, ITO resistance target and application environment to formulate the production plan.
02 Material Selection
Select soda-lime, borosilicate or fused silica substrate based on pressure rating, temperature range and optical requirement.
03 Dome Forming & Annealing
Curved-glass forming on custom mold, stress relief annealing to prevent spontaneous breakage under pressure.
04 Tempering & CNC Edge
Tempered treatment for 8 Mohs hardness, CNC grinding of flange and edge to match your housing.
05 Curved-Surface ITO Sputtering
High-vacuum magnetron sputtering on the curved inner surface to achieve customer-specified sheet resistance.
06 Busbar & Edge Insulation
Apply edge busbar for power feed, add insulated border to prevent current leakage and salt-spray corrosion.
07 Optional Over-Coating
Stack AR, AF, anti-scratch or IR-cut over-coating on ITO for optical performance and durability.
08 Multi-Dimensional Inspection
Sheet-resistance test, transmittance test, dimension check, pressure / salt-spray sample test and surface defect inspection.
Why Start With a 5-Piece ITO Dome Sample?
01 Verify Housing Fit
Confirm dome diameter, curvature and flange dimension fit your CCTV or ROV housing before mass production.
02 Test Heating & Optics
Evaluate anti-fog performance, transmittance and ITO uniformity under your real outdoor or underwater environment.
03 Reduce Production Risk
Validate pressure rating, salt-spray durability and busbar reliability with a small sample batch first.
Not Sure Which ITO Dome Configuration You Need?
| Your Requirement | Recommended Dome Solution |
|---|---|
| Outdoor CCTV, anti-fog / anti-frost in winter | Tempered Soda-Lime Dome + Heater-Grade ITO + Edge Busbar + AR |
| Underwater ROV, IP68 pressure, marine environment | Borosilicate Dome + ITO Coating + IR-Cut Over-Coating |
| High-temperature or UV environment | Fused Silica Quartz Dome + ITO Sputtering |
| Smart touch panel, curved sensor surface | Tempered Glass Dome + ITO Coating + AF Over-Coating |
| Higher camera image clarity | ITO plus AR over-coating composite stack |
| Custom flange, cutout or special shape | CNC edge grinding per housing drawing |
| Early-stage camera R&D validation | 5-Piece Sample Order, 3-5 day lead time |
Still confused about your dome configuration? Ask Our Engineers for Free Guidance
Frequently Asked Questions Before Ordering
Request a Custom ITO Glass Dome Quote
Tell us your housing drawing or application. Our engineers will review your CCTV or underwater project and provide a matched dome solution.
Before You Send Your Drawing, Prepare These Inputs
- Application: outdoor CCTV, underwater ROV, smart touch panel, industrial optical instrument, or other
- Dome size: diameter, radius of curvature, flange dimension, thickness
- Substrate: soda-lime / borosilicate / fused silica
- ITO resistance target: e.g. 10-50 Ω/sq for anti-fog heating, or 100+ Ω/sq for touch / conductive only
- Heating requirement: target surface temperature, anti-fog range, power supply (12V / 24V DC)
- Environment rating: IP66 / IP67 / IP68, salt spray, UV, temperature range
- Over-coating: AR / AF / anti-scratch / IR-cut / none
- Quantity: 5-piece sample, pilot batch, or mass production
Free engineering review · 5-piece sample support · 19+ years optical glass manufacturing
Explore More ITO Dome Resources
- What is ITO conductive glass? Properties and uses — material overview and design trade-offs
- ITO glass heating principles: power and control — how voltage, resistance and temperature relate on a heated dome
- How to specify custom ITO glass: RFQ guide — every field to include in your dome inquiry
- Case study: large-format ITO heater glass for a Korean HMI display — 724×418mm, 5 Ω/sq, 24V DC
- China custom optical dome manufacturer — 19+ years curved-glass forming and ITO sputtering capability
Have a CCTV or Underwater ITO Dome Project? Let's Review It.
Send your housing drawing, dome photo, diameter or ITO resistance target. You don't need to finalize every specification. Our engineering team will provide a custom dome solution for your camera.
Free engineering review · 5-piece sample support · OEM/ODM manufacturing
Need Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.









