Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888
Home / All / Custom Precision Optical Components / Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)

Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)

Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)
Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)Laser Drilled TGV Glass Wafer (Drill Only, No Metallization)
Share
CategoriesCustom Precision Optical Components
BrandFELIX GLASS optical glass Manufacturing base
Glass MaterialAlkali-Free Aluminosilicate Glass / Borosilicate Glass
Substrate Format100 mm, 200 mm, or 300 mm Round Wafers / Custom Square Panels
Nominal Thickness100–1,000 µm, depending on glass grade and format
Via SpecVia Diameter 20–200 µm; Minimum Pitch ≥50 µm; Aspect Ratio up to 10:1
Delivered ConditionLaser-Drilled and Cleaned Open Vias, No Metallization or Copper Fill
ApplicationSemiconductor Packaging / TGV Metallization Development
DownloadDownload pdf
Detail Information

Laser-Drilled TGV Glass Wafer (Drill Only, No Metallization)

Felix Glass supplies laser-drilled through-glass via (TGV) wafers and custom glass panels for advanced packaging development. The glass is delivered with open through-holes and cleaned after drilling. The drill-only scope excludes dielectric liners, barrier and seed layers, copper fill, redistribution layers (RDL), and post-fill planarization.

Use this substrate when your team needs a custom via layout and will qualify its own thin-film deposition, electroplating, or metallization process. Send the substrate dimensions and via layout so we can review the geometry before quoting samples.

TGV Wafer Specifications

Parameter Specification or Design Input
Base Glass Material Alkali-free aluminosilicate glass or borosilicate glass. Specify the exact grade if your process requires one.
Substrate Format 100 mm, 200 mm, or 300 mm round wafers. Custom square panels are available for review.
Nominal Glass Thickness 100–1,000 µm (0.10–1.00 mm), subject to glass grade, format, and via geometry.
Via Diameter 20–200 µm for engineering review. Specify entrance and exit diameters, their tolerances, and the minimum internal diameter if critical.
Via Pitch Center-to-center pitch from 50 µm, subject to layout review. Include the minimum glass spacing between adjacent holes and the via-to-edge clearance where critical.
Via Aspect Ratio Up to 10:1 for engineering review. Specify which via diameter is used to calculate the thickness-to-diameter ratio, especially for tapered vias.
Via Profile and Position Custom arrays and non-uniform layouts are reviewed against your drawing. Include the positional tolerance, datum, and any taper limit.
Delivered Condition Drilled and cleaned glass with open, unfilled, unmetalized through-vias.

The ranges are reviewed together. Feasibility depends on the glass grade, thickness, via diameter and profile, pitch, and array layout.

Via Design for Downstream Metallization

For deposition or plating trials, provide the required entrance, exit, and minimum internal diameters along with the allowable taper. If your process requires a specific deposition direction, identify the corresponding wafer face on the drawing. This gives us the geometry needed to review the drilled substrate against your process requirements.

For dense or irregular arrays, include the smallest local pitch, allowable via position error, and edge clearance. If the layout and drawing are separate files, identify the governing revision and drawing units.

Post-Drill Cleaning and Inspection

Post-drill cleaning removes drilling debris from wafer surfaces and via openings. Agree on the inspection scope and acceptance limits before ordering. Typical inspection items include via diameter and position, visible edge chipping, sidewall condition, residual debris, substrate dimensions, total thickness variation (TTV), and warp.

If your qualification plan requires cross-section sampling or an inspection report, specify the sample locations, measurement method, and report contents in the RFQ. Include any wafer shipper or particulate acceptance requirements that apply to incoming inspection.

Typical Applications

  • TGV liner, barrier, seed-layer, and copper electroplating qualification.
  • 2.5D packaging test vehicles for chiplet and high-bandwidth memory (HBM) development.
  • Via layout and manufacturability trials for glass-core and fan-out packaging.
  • Glass substrate prototypes for co-packaged optics (CPO) and photonic packaging.

Related Glass Substrates and Design Guides

Frequently Asked Questions

Can you review an irregular or mixed-pitch via layout?
Yes. Send your dimensioned drawing or Gerber layout with the via sizes, pitch, datums, and edge clearances. Feasibility is reviewed for the complete layout.
Can I specify sidewall taper and request a cross-section?
Yes. Include the target entrance and exit diameters or the allowable taper, along with the glass thickness and tolerance. Cross-section sampling can be requested for qualification.
Can I order samples before committing to a production lot?
Submit your drawing and target sample quantity. We will confirm sample availability, acceptance criteria, and lead time after reviewing the design.

Request a TGV Drilling Quote

Send your via layout, glass grade, wafer or panel size, nominal thickness, via diameters, minimum pitch, and sample or production quantity. Include any critical taper, positional tolerance, or inspection requirements for engineering review.

Request a Quote

Need Custom Optical Glass Solution?

Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.

Get Free RFQ

Custom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.

We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address
James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News