Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888
Home / All / Custom Precision Optical Components / Laser Debond Glass Carrier for FOWLP & FOPLP

Laser Debond Glass Carrier for FOWLP & FOPLP

Laser Debond Glass Carrier for FOWLP & FOPLP
Laser Debond Glass Carrier for FOWLP & FOPLPLaser Debond Glass Carrier for FOWLP & FOPLPLaser Debond Glass Carrier for FOWLP & FOPLPLaser Debond Glass Carrier for FOWLP & FOPLPLaser Debond Glass Carrier for FOWLP & FOPLP
Share
CategoriesCustom Precision Optical Components
BrandFELIX GLASS optical glass Manufacturing base
Product SpecificationsFG-glass carrier
Glass MaterialAlkali-Free Aluminosilicate Glass / Borosilicate Glass
Substrate Format100 mm, 200 mm, or 300 mm Round Wafers / Custom Panels
Nominal Thickness300–1,000 µm, depending on glass grade and format
Release LayerSacrificial Coating for Laser Debonding
Surface FinishDouble-Side Optical Polish, Ra ≤0.5 nm
ApplicationTemporary Support Carrier for FOWLP / FOPLP Fan-Out Packaging
DownloadDownload pdf
Detail Information

Temporary Release Glass Carrier for FOWLP and FOPLP

Felix Glass supplies polished glass carriers with a laser-release coating for fan-out wafer-level packaging (FOWLP) and fan-out panel-level packaging (FOPLP). The carrier provides rigid temporary support for thin dies and package structures during redistribution layer (RDL) fabrication, dielectric processing, and molding. After the supported process steps are complete, the carrier is removed by laser debonding under conditions qualified for the package stack.

Round wafers and custom panels can be reviewed against your equipment dimensions, bonding stack, process temperatures, and laser debond system.

Glass Carrier Specifications

Parameter Specification or Design Input
Base Glass Material Alkali-free aluminosilicate glass or borosilicate glass. Specify the required grade or coefficient of thermal expansion (CTE) range if defined by your process.
Carrier Format 100 mm, 200 mm, or 300 mm round wafers. Custom square or rectangular panels are available for review.
Nominal Base Glass Thickness 300–1,000 µm (0.30–1.00 mm), subject to glass grade and carrier format. Specify the nominal thickness and allowable thickness tolerance.
Base Glass Surface Finish Double-side optical polish before coating. A target of Ra ≤ 0.5 nm can be reviewed with the requested measurement method and scan area.
Release Layer Sacrificial coating for laser debonding. Specify the coated side, usable coated area, edge exclusion, and any coating uniformity requirements.
Flatness, TTV, and Warp State any flatness, total thickness variation (TTV), and warp limits separately. Identify whether each limit applies to the base glass or the coated carrier.
Laser Debond Requirements Provide the laser wavelength, equipment model, and available energy density range for review with the bonding materials and process conditions.

Carrier size, thickness, glass grade, and release coating are reviewed together for the intended process.

Bonding and Laser Debond Qualification

Share the layer sequence from the glass carrier to the package, including the temporary bonding adhesive if used, along with the peak process temperature and time at temperature. Include the molding, curing, and dielectric processing steps that the carrier will support. These inputs establish the conditions the coated carrier must meet before release.

For debond qualification, provide the target laser wavelength and any equipment limits. Define what counts as an acceptable release, including complete separation, allowable residue, and any restrictions on post-debond cleaning. Confirm the release conditions on a representative bonded sample before extending them to a production wafer or panel.

Typical Applications

  • Wafer-format temporary support for fan-out RDL, dielectric, and molding process development.
  • Panel-format temporary support for multi-die FOPLP layouts and handling trials.
  • Qualification of temporary bonding, laser debonding, and post-debond cleaning.
  • Thin-die handling trials for chiplet, RF module, sensor, and photonic packaging projects.

Inspection and Packaging

Pre-shipment inspection can cover carrier dimensions, flatness or warp, coating coverage and uniformity, scratches, digs, and visible particles. If your incoming inspection uses a particle count limit or a specific measurement method, include it in the RFQ. Inspection reports, qualification samples, and packaging for the coated face can be confirmed during quotation.

Related Glass Substrates and Design Guides

Frequently Asked Questions

Can you supply custom rectangular carriers for FOPLP?
Yes. Send the panel length, width, thickness, corner and edge requirements, and usable coated area. We will review the format against your handling and processing equipment.
Can the glass carrier be reused after laser debonding?
Reuse depends on whether the recovered glass meets the agreed surface and dimensional limits after stripping and cleaning. Include any recoating and reuse requirements in your qualification plan.
How do I specify a post-debond residue limit?
Identify the surface to inspect, the inspection method, and the acceptance limit before and after any permitted cleaning step. Evaluate the result on a representative package stack.
Can you review a thermal-release process?
This carrier configuration uses a laser-release coating. For a thermal-release project, share the tape or adhesive specification and the bonding and release temperatures for a separate compatibility review.

Request a Glass Carrier Quote or Samples

Send your carrier drawing, glass grade, thickness, coated area, bonding stack, peak process temperature, laser wavelength, and required quantity. Include any critical inspection or post-debond residue limits so we can review sample feasibility, pricing, and lead time.

Request a Quote

Need Custom Optical Glass Solution?

Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.

Get Free RFQ

Custom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.

We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address
James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News