Glass Core Substrate for High-End FC-BGA Packaging






Patterned Glass Core Substrate for FC-BGA Packaging
Felix Glass supplies patterned glass core substrates for flip-chip ball grid array (FC-BGA) packaging. The glass core carries circuit patterns and pad features defined by the substrate layout. This product is intended for substrate manufacturers and packaging teams developing multi-die packages, AI accelerators, networking ASICs, and other high-I/O devices.
Send your circuit layout and layer stack for a review of the panel dimensions, patterned faces, pad geometry, and required processing. The quoted configuration defines which layers and features are included at delivery.
Product Specifications
| Parameter | Specification or Design Input |
|---|---|
| Core Glass Material | Alkali-free aluminosilicate glass. Specify the required grade or coefficient of thermal expansion (CTE) range if defined in your stack-up. |
| Nominal Glass Core Thickness | 100–800 µm for design review, subject to panel size and processing requirements. State the glass core thickness separately from any finished substrate thickness requirement. |
| Substrate Format | Custom rectangular panels. Round wafer formats can be reviewed on request. Include panel or wafer dimensions, tolerances, and any edge clearance requirements. |
| Circuit Pattern and Pads | Provide the required patterned faces, conductor material and thickness, minimum line width and spacing, pad dimensions, and registration tolerances. |
| Dielectric Build-Up and Finish | Specify any required ABF or other dielectric, layer sequence, layer thicknesses, and pad finish. The layer stack and finished condition are confirmed during quotation. |
| Through-Glass Vias (TGVs) | If required, provide the via map, diameters, pitch, and desired via condition. Open or copper-filled via configurations are subject to design review. |
| Dimensional Acceptance | State the applicable thickness tolerance, total thickness variation (TTV), and flatness or warp limits. Identify the processing stage and measurement conditions for each limit. |
Circuit Layout and Stack-Up Review
For panelized layouts, include the overall panel dimensions, unit layout, alignment marks, edge keep-out zones, and drawing revision. Identify the top and bottom faces on the drawing. If your design has patterns on both faces or uses TGVs, specify the required registration between the patterns and via locations.
For lamination or reflow qualification, provide the dielectric stack, copper distribution, and thermal profile. State any finished-substrate warpage limit together with the measurement temperature and method. For high-speed routing, include the target impedance or operating frequency range if it affects the stack-up review.
Typical Applications
- Patterned glass core substrate development for high-I/O FC-BGA packages.
- Routing and pad layout development for AI accelerator and multi-die packages.
- Substrate evaluation for networking ASICs and switch devices.
- Test vehicles for pattern registration, dielectric build-up, and vertical interconnect qualification.
Inspection and Packaging
Define the inspection requirements for the agreed delivery configuration. These can include panel dimensions, circuit feature dimensions and registration, pad condition, surface defects, and flatness or warp. If the order requires electrical continuity testing, via cross-sections, or a lot inspection report, specify the test method, sampling plan, and acceptance limits in your RFQ. Packaging can be reviewed to protect the patterned surfaces during shipment and handling.
Frequently Asked Questions
- Does the substrate ship with a circuit pattern?
- Yes. This product is a patterned glass core substrate. The drawing and quotation define the circuit layout, patterned faces, conductor material, and pad finish for the order.
- Can I specify ABF build-up layers or copper-filled vias?
- Submit the layer stack and via map for review. Include the requested dielectric, via dimensions, and fill acceptance criteria. Any build-up or via processing included at delivery will be listed in the quotation.
- What files should I send for a sample quote?
- Send the dimensioned substrate drawing, circuit layout, and layer stack with matching revision numbers. Include sample quantity, critical tolerances, and any inspection reports needed for qualification.
Related Glass Products and Design Guides
- Bare polished glass wafer for teams developing their own patterning or via processes.
- Laser-drilled TGV glass wafer with open vias for in-house metallization.
- Copper-filled TGV glass interposer for designs requiring conductive vertical interconnects.
- Temporary release glass carrier for fan-out wafer-level and panel-level processing.
- Photonic TGV glass substrate for co-packaged optics.
- TGV wafer and interposer engineering design specifications.
- TGV glass interposer selection guide.
Request a Patterned Glass Core Quote
Send your circuit layout, glass core dimensions and thickness, layer stack, and target quantity. Include any critical line and space, pad, registration, via, or inspection requirements. We will review the requested delivery configuration and confirm sample feasibility, pricing, and lead time.
Request a QuoteNeed Custom Optical Glass Solution?
Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.
Get Free RFQCustom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.
We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.
- Name
- *Title
- *Content

- What is the minimum order quantity for custom precision optical glass components?
Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.
- Can I order samples for testing before bulk production?
Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.
- What is the production lead time for custom optical glass components?
A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.
- Are your optical glass products ISO, CE and RoHS certified?
All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.
- Do you offer one-stop custom optical glass processing services?
Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.
- Name
- *Title
- *Content
With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.
- Felix Glass Expands IR Optics Production | Faster Lead Time for Custom ZnS, ZnSe, Sapphire & Fused Silica WindowsFelix Glass manufactures custom ZnS, ZnSe, sapphire domes & fused silica IR windows. Fast prototype and AR coating available. Get your technical quote within 24h for thermal imaging & laser systems.
- DMS Cover Glass Material Selection: Aluminosilicate vs Borosilicate Glass for In-Cabin CameraSelecting the right substrate impacts DMS camera lifespan & image quality. This guide compares aluminosilicate and borosilicate glass. Felix Glass provides both substrates with printing and coating.






