Dongguan Felix Glass Co., Ltd. E-mail: james@felixglass.com - Tel: +86 185 6503 2888
Home / All / Custom Precision Optical Components / Copper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous Packaging

Copper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous Packaging

Copper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous Packaging
Copper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous PackagingCopper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous PackagingCopper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous PackagingCopper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous PackagingCopper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous Packaging
Share
CategoriesCustom Precision Optical Components
BrandFELIX GLASS optical glass Manufacturing base
Glass MaterialAlkali-Free Aluminosilicate Glass / Borosilicate Glass
Substrate Format100 mm, 200 mm, 300 mm Wafer / Custom Panel Sizes
Nominal Thickness100–700 µm
Via SpecVia Diameter 20–120 µm; Pitch ≥50 µm; Aspect Ratio up to 10:1
MetallizationDielectric Liner / Ti Barrier / Cu Seed / Void-Free Electroplated Copper Fill, CMP Planarized
ApplicationAI GPU, HBM Stacks, High-Speed ASIC and 2.5D Heterogeneous Packaging
DownloadDownload pdf
Detail Information

Copper Filled TGV Glass Interposer for AI GPU & HBM 2.5D Heterogeneous Packaging

Felix Glass supplies void-free copper filled TGV glass interposers, finished with laser drilled vias, dielectric liner, Ti/Cu seed deposition, electroplated copper fill and CMP planarization. Designed for high-density chiplet integration, this finished interposer is the ready-to-test interconnect platform for AI GPU, HBM stacks, high-speed networking ASIC and 2.5D advanced packaging.

What Is Copper Filled TGV Glass Interposer

A copper filled TGV interposer is a finished glass interposer substrate with fully metallized, void-free through-glass vias. Starting from double-side polished alkali-free glass, we perform laser via drilling, sidewall cleaning, insulating dielectric liner, barrier and seed layer sputtering, void-free copper electroplating, then CMP to remove overburden copper. Optional single or double-side RDL patterning can be added. Unlike bare glass blanks or drilled-only TGV wafers, this part delivers functional vertical electrical interconnects for your assembly and reliability qualification.

Key Performance Advantages

  • Void-free copper via filling, X-ray inspected for internal void and seam defects
  • Tunable CTE closely matched to silicon, suppressing thermal warpage during HBM stacking and thermal cycling
  • Ultra-low dielectric loss, stable signal integrity for 112Gbps / 224Gbps high-speed interfaces
  • Smooth CMP surface, compatible with fine-line RDL, microbump and hybrid bonding process
  • Large panel scalability vs silicon TSV interposer, lower cost for large multi-die packages
  • Semiconductor-grade metrology reports: TTV, warpage, via position accuracy, sidewall quality, electrical continuity

Standard Technical Specifications

Parameter Spec Range
Glass MaterialAlkali-free aluminosilicate / borosilicate glass
Form Factor100mm,200mm,300mm wafer, custom panel sizes
Glass Thickness100μm ~ 700μm
TGV Via Diameter20μm – 120μm; Aspect ratio up to 10:1
Via PitchMinimum 50μm
Metallization StackDielectric liner / Ti barrier / Cu seed / Electroplated Cu fill
Surface PlanarizationCMP post copper fill
FlatnessTTV ±5μm standard; ±2μm tight tolerance option
Warpage≤30μm @300mm wafer after full copper filling and CMP
Optional Add-onSingle-side / double-side RDL, NiAu finish

Manufacturing & Inspection Flow

Process sequence: Double-side polished glass blank → Laser via ablation & cleaning → Dielectric liner deposition → Ti/Cu barrier-seed sputtering → Void-free copper electroplating → CMP planarization → Electrical continuity test → X-ray void inspection → Metrology mapping → Visual defect screening → Packing. Every sample can be supplied with cross-section SEM sampling report for qualification batches. We follow your drawing DFM rules before tooling and flag high-risk geometry at the quotation stage.

Primary Application Areas

  • AI GPU 2.5D packaging with HBM memory stacks and chiplet disaggregation
  • HPC high performance computing multi-chiplet heterogeneous integration
  • High-speed networking ASIC and high-frequency RF interposer test vehicles
  • Silicon photonics and co-packaged optics intermediate interconnect substrate
  • Semiconductor qualification test coupons for TGV reliability validation

Compare With Drilled-Only TGV Wafer

  • Laser Drilled TGV Wafer: Only via holes, no copper filling. For customers owning internal PVD, plating and CMP lines.
  • Copper Filled TGV Interposer: Fully finished copper filled vias + CMP. Ready for RDL, bumping and reliability test; reduces your internal fab workload and qualification cycle.

TGV Cluster Navigation

Select other TGV substrate variants matching your process stage:

Request RFQ for Copper Filled TGV Interposer

Submit your stack drawing, via array layout, target glass grade, wafer size/thickness, RDL requirements, surface finish, inspection criteria and quantity breakdown (sample / qualification / volume). Our optical and semiconductor packaging engineers run DFM review and return formal quotation, lead time and risk notes under NDA.

FAQ

Q: Can you guarantee zero void in copper filled TGV?
A: We use optimized bottom-up electroplating process and X-ray 100% screening on acceptance lots to control voids below your specified threshold. Cross-section SEM sampling is available for qualification validation.

Q: Is RDL included as standard?
A: RDL is optional add-on. Standard deliverable is copper filled + CMP planarized interposer without redistribution layer.

Q: What reliability tests can these interposers support?
A: Suitable for thermal cycling, HAST, TCB, high-temperature storage and electrical continuity reliability evaluation for chiplet packaging.

Q: What file format do you accept for via array?
A: Gerber, OASIS, DXF, Excel coordinate list and PDF drawing are all supported for DFM check.

Q: What is typical lead time for engineering samples?
A: Sample lead time depends on via geometry and metrology requirements, we will confirm in formal quotation after drawing review.

Contact TGV Packaging Engineering Team

Share your specification package to get DFM feedback, budget price and sample schedule for copper filled TGV glass interposer.

Request a Quote

Need Custom Optical Glass Solution?

Send us your drawing, dimension & coating requirements for fast quotation within 24 hours.

Get Free RFQ

Custom Precision Optical & Glass Components Manufacturer – Felix Glass Co., Limited.

We supply Industrial Glass, Sapphire Optics, Optical Lenses/Prisms/Filters, Infrared IR Optics, Functional & Display Glass, N-BK7/H-K9L Optical Glass, supporting OEM mass production and laboratory custom prototypes. Flexible MOQ & free sample service available. Fill in the form to download full datasheets and get factory wholesale price within 24 hours.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address
James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.James Fu, Sales Director at Felix Glass, with contact information for custom optical components and precision glass manufacturing.
Learn more from our FAQ
What is the minimum order quantity for custom precision optical glass components?

Felix Glass supports paid prototypes, small trial batches and volume production. Minimum order quantities depend on the material, dimensions, tolerances and coating requirements. Send us your drawings and required quantity so we can confirm the MOQ, price and lead time.

Can I order samples for testing before bulk production?

Yes. Felix Glass offers paid custom samples for evaluation before bulk production. Sample costs and lead times are assessed based on material, dimensions, tolerances, coating requirements and quantity. Please send us your drawings or specifications so we can provide a sample quotation and estimated production lead time.

What is the production lead time for custom optical glass components?

A: The production cycle for standard samples is 3-10 working days, while mass production requires 15-35 working days, depending on the complexity of the product and the order quantity. We provide reliable precision optical glass components and fast delivery services for orders from industries such as defense, industrial equipment, medical devices, shipbuilding, robotics, automotive, and aerospace. Please submit your project details so we can provide you with an accurate delivery schedule.

Are your optical glass products ISO, CE and RoHS certified?

All precision optical glass components from FELIX OPTICAL GLASS comply with ISO quality system standards as well as CE and RoHS requirements. We provide comprehensive test reports, spectral graphs, material certificates, and inspection documents for customer review. Please feel free to request complete certification details and a formal quotation at any time.

Do you offer one-stop custom optical glass processing services?

Yes. We offer a full range of precision optical glass component processing services, including CNC machining, precision grinding, optical polishing, chemical/physical tempering, vacuum coating (AR anti-reflective coating, AF anti-fingerprint coating, AG anti-glare coating, IR infrared coating), and screen printing. From raw materials to finished products, every step is completed in our own factory. Please tell us your needs, and we will provide you with the most cost-effective solution.

CONTACT US NOW FOR A QUOTE
We aim to respond to your inquiry within one business day. A formal quotation is typically provided within 1–2 business days after all required drawings and specifications are received. Complex designs or special material and coating requirements may require additional engineering review; we will advise you of the expected quotation timeline.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address

With 19 years of experience as a precision optical glass expert, we provide comprehensive and satisfactory customized solutions.

Navigation
News